Electronics Forum | Thu May 26 11:58:35 EDT 2016 | tombstonesmt
Is the frame placed on assembly as a guide to install the masking tape?
Electronics Forum | Fri Mar 06 09:28:14 EST 1998 | Mike
I will be starting a conformal coating process soon, I am looking for any pointers on 1) Best method for masking components, tape mask, liqued mask 2) Which is best Spray or Dip? 3) Compatiblity with no clean solder paste (flux residue) I have Mil
Electronics Forum | Thu May 27 15:59:30 EDT 2010 | mikesewell
ATS-667 tape. You can buy direct http://www.ats24.com/index.cfm?fuseaction=content.display&contentid=50 or through distribution such as All-Spec. Polyester film with rubber resin adhesive (no silicone) = clean mask lines. Call for a sample.
Electronics Forum | Sat Jul 22 03:27:36 EDT 2023 | shrikant_borkar
hi here are consolidated inputs to you you must validate before establishing your process. ESD-safe Material: Ensure that the masking tape is made of ESD-safe materials that have low triboelectric charge generation. Common materials used in ESD-sa
Electronics Forum | Thu Jan 30 15:41:52 EST 2003 | MikeF
The easy part is to determine which parts should be coated. The harder part is making sure the parts that should not be coated do not get coated. I don't even want to think about the amount of labor and materials I've lost due to conformal coat get
Electronics Forum | Thu May 26 09:54:49 EDT 2016 | swag
Not exactly SMT but something I recently did that might save you lots of time and money: Complex high $ assy that has 25+ conformal coat keep out areas - most different shapes. All locations are dimensioned on customers' print. We tried a one piec
Electronics Forum | Sat Apr 04 15:38:10 EST 1998 | Sam Forman, MicroCoat Technologies
| I will be starting a conformal coating process soon, I am looking for any pointers on | 1) Best method for masking components, tape mask, liqued mask | 2) Which is best Spray or Dip? | 3) Compatiblity with no clean solder paste (flux residue) |
Electronics Forum | Fri Mar 06 22:52:16 EST 1998 | Scott McKee
| I will be starting a conformal coating process soon, I am looking for any pointers on | 1) Best method for masking components, tape mask, liqued mask Masking tape or rubber caps will work, the ligued mask is too hard to remove. | 2) Which is best
Electronics Forum | Tue Mar 06 07:18:26 EST 2007 | Rob Cass
I actually bought this tape directly from a disrupter of Saint-Gobain series M797. It was placed on 6" x 9" sheets to have unique conformal coating masking cut outs made. Took some effort to get the process worked out but all is well now.
Electronics Forum | Wed Jan 31 10:56:23 EST 2018 | dontfeedphils
I'm working on bringing up a new conformal coat process/workcenter and have a few questions I'm hoping someone might have experience with. Right now we're manually spraying both coating materials (1B31 and 1A33 from Humiseal) using HVLP guns. I run