Electronics Forum | Fri Sep 06 11:07:27 EDT 2013 | bobpan
Use the hht and do a function 6.....this will tell you the version of firmware that the machine is running and then you will know which mod code list to go from. good luck
Electronics Forum | Fri Sep 06 11:37:43 EDT 2013 | bobpan
I dont have a list for anything that old. The oldest i have is version 2.10. Check to see if the mod code list that you have says what version it is.....usually its on the top of the document
Electronics Forum | Fri Sep 28 17:39:44 EDT 2012 | hishamuddinjohari
Hi, I cannot find the following SMD semiconductor marking code 'H890' somebody help me
Electronics Forum | Mon Sep 30 15:26:48 EDT 2013 | leemeyer
I have been using Quad 4C's for 15 years and have never come across this error. Everything initializes OK but when I start a program through Central Controller I get an "OUT OF MEMORY" error. I have flushed the Mod codes and re-entered them and have
Electronics Forum | Mon Nov 21 14:22:22 EST 2011 | mosborne1
Tim, The main controller card has a battery on it. Power down the machine and disconnect power. Stick a credit card between the battery and the clip. Hold for at least 60 seconds. Then power back up the machine. Make sure to have yourmod codes writ
Electronics Forum | Tue Sep 03 05:37:06 EDT 2013 | bobpan
It sounds like your dispenser has a problem....The default mod code for 56 is 0 (this should be off). Thats why when you cleared the mod codes the machine was able to home. When you reload your saved mod codes it is probably set to 1. The machine wil
Electronics Forum | Mon Aug 23 12:47:53 EDT 2004 | mmjm_1099
Here's some codes.... maybe not ones you need but worth a look. http://clivetec.0catch.com/SMD_Codes1.htm
Electronics Forum | Thu Jan 11 08:20:55 EST 2007 | davef
Marking * SMD marking list on http://www.tkb-4u.com is more update than "The SMD Codebook" on http://www.marsport.demon.co.uk/smd/smdcode.htm * http://www.marsport.demon.co.uk/smd/mainframe.htm * http://www.chipdocs.com/pcat/015/1124.html * http:/
Electronics Forum | Fri Sep 06 12:34:00 EDT 2013 | bobpan
Your firmware is so old that the problem is not in the mod codes anyways. You have a problem with the cyberoptics head. If its not working at all, i would remove the lens assy on the front side where the cable plugs in and blow out the unit. Maybe if
Electronics Forum | Thu Sep 08 13:07:18 EDT 2016 | claudea2
Hello Bob, we changed the nozzle z parameter until we got limit errors and backed up 1 mil. There was a slight reduction in the limit errors on the pickup of the component but it is still a problem. With the mod code we adjust the soft z height to ab