Electronics Forum | Fri Sep 06 05:09:13 EDT 2013 | bobpan
Mod code 69 in early firmware versions was laser align part size addition but in later versions is was laser intensity.....if its set to 0 try it at 250 and see what it does....if this doesnt work....set it back to 0. It seems that when you put somet
Electronics Forum | Thu Sep 08 15:22:32 EDT 2016 | bobpan
If its a tall part and you are trying to scan it lower than 200 or so...you can have this problem (limit error). Thinking of things to look at.....Is your z-rod spring sticking? Push up on it and it should spring back with NO hesitation...if it does.
Electronics Forum | Wed Apr 11 07:25:21 EDT 2007 | Mark
Hi Piotr, We had the same problem before. Each engineer created his own name and after while nobady knows what it is. We started to use our own coding system of components using special code matrix. We use main features of componets like body shape,
Electronics Forum | Tue Dec 14 10:14:54 EST 1999 | Chris May
Tony, Quick update. Check out this website.Just came across it. http://www.marsport.demon.co.uk/smd/smdcode.htm Regards, Chris.
Electronics Forum | Mon Feb 27 22:04:24 EST 2023 | kumarb
Hi. Our X4 is posting the attached error code. In the reference menu, the table dances to align with the SMD stencil and the shuttled PCB. During this activity, hearing some new mechanical ticking sounds that were not hear before. Any suggestions on
Electronics Forum | Thu Nov 17 17:44:19 EST 2011 | bobpan
Tim, 1. You dont need the vacuum verify if the quadalign is working properly. If you have the part quad-aligned and dont have alignment type at 0 it will never 'not' place a part. More or less...the vac verify was needed for the chucking machine (3c)
Electronics Forum | Fri Aug 30 05:34:28 EDT 2013 | bobpan
I would check the following: 1. Make sure the head can move in all axis including z and theta by physically moving each. 2. Check the voltage from the main power supply which is located in the middle of the machine on the top of the main board asse
Electronics Forum | Fri Sep 27 21:01:52 EDT 2013 | marcelorotofrance
Hi everybody This week I was creating a new program by means of saving a successfull existing one under a new name with "UTILITIES/Data Base Utilities/Select/Copy/Delete Board Program" on CC7.54, to seize useful parts without having to teach them aga
Electronics Forum | Thu Jan 02 04:56:38 EST 2014 | bobpan
Here is a couple of things to look at: 1. Make sure the boards are plugged into the correct position. Also just leave out the transport card to see if its hanging up the machine. The transport board should be the board all the way to the right. 2. M
Electronics Forum | Wed Jun 01 11:02:57 EDT 2016 | claudea2
I have 3 used Quad 4Cs and the nozzle changer on one machine never worked. I decided to troubleshoot it this week. I repaired the changer by changing a defective optical sensor but I still get error 17 when I try a run-step nozzle 1, 2 or 3. Error 17
