Electronics Forum | Mon Jul 13 11:43:01 EDT 2015 | bobpan
Autoprogram requires win 3.11 or windows 95 to run. It will not work with anything higher than that. If you still want to give it a try go to my website @ www.precision-repairs.com and e-mail me and I will send you the 5 autoprogram disks that I ha
Electronics Forum | Wed Apr 11 11:08:27 EDT 2012 | bobpan
1281x1281 is probably your total quad align window. Which usually means your scanning under the part. Try to scan more towards the top....instead of 20 try 5. It could be the nozzle is not seating on good or the spring on the z-rod is weak and when t
Electronics Forum | Fri Mar 04 19:38:44 EST 2011 | olddog
We are a very small (2 people) company and have recently purchased a used Quad 4c Mk II, for our low-volume in-house production. The machine appears to work perfectly for our needs. My question is regarding programming from a concept standpoint. Our
Electronics Forum | Wed Apr 11 00:40:19 EDT 2012 | ngineer
I have a problem setting up the LAE on my Quad 4c. I set it up for 0805, and it seems to work, although it rejects a lot of parts, at least it places "most" of them. I tried setting up on a soic14, and could not get even one to pass. I believe I h
Electronics Forum | Tue Oct 10 12:34:43 EDT 2006 | bobpan
Larry, Do a runstep nozzle then open the door and look and see if the nozzle is all the way on. Push up on it and see if it moves up
Electronics Forum | Wed Apr 26 09:18:19 EDT 2017 | dentata911
Hello Is it possible to make really big placement delay on this maschine? 3-4 seconds? Thank you.
Electronics Forum | Wed Apr 26 11:58:32 EDT 2017 | bobpan
Mod code 7 is a placement delay.....changing it will slow your entire program down. If you just want to slow it down for 1 placement.....you have to insert a mod code change in the sequence steps....this is easily done in central controller. Good L
Electronics Forum | Wed Jun 07 04:44:23 EDT 2017 | dentata911
Thank you for your answer. But maximum value for modcode 7 is 255. 255x3.3 msec is 0.8 sec. And I need 2-3 seconds...
Electronics Forum | Wed Sep 04 12:55:51 EDT 2019 | dwl
Sounds like its just rejecting parts. Either the length and width of the component is wrong or the tolerance is set too tight. I don't remember the function codes to edit the tolerance but I left them at 30% (the max) and never had any problems with
Electronics Forum | Thu Sep 05 12:40:57 EDT 2019 | bobpan
Also check the lae on the pickup that is being dumped. I think its function 16....make sure that the alignment type is 0.