Electronics Forum | Fri Aug 23 01:40:14 EDT 2019 | sssamw
Such huge difference between low and high thickness will definitely cause paste accumulation on the squeegee side. Normally is 2 mil max difference.Yes, dispense maybe help for thicker paste or print two times.
Electronics Forum | Fri May 07 15:58:36 EDT 2010 | smt_guy
I'm looking for an optical scope that can penetrate through a gap of 0.005" to 0.010". Is there anything available in the Electronics / Semiconductor Industry for this kind of application? I want to see what's inside that size of gap for solder short
Electronics Forum | Mon Aug 12 21:54:33 EDT 2019 | davef
I've never seen successful printing with a step as deep as you seem to be saying. The keep out would have to be jigundous!!!! SMTnet Technical Library: https://smtnet.com/library/files/upload/Step-Stencils-laserjob.pdf I'd guess * Maximum step
Electronics Forum | Mon Jun 18 10:02:26 EDT 2007 | dyoungquist
5mil should work fine. Some stencil manufacturers charge more if you go less than 5mil so stick with 5mil.
Electronics Forum | Tue Feb 21 21:17:41 EST 2006 | Cal Kolokoy
M, The paste height is what you establish it as. You're probably using a laser measurement system, and these depend on where your reference datum is. Some will measure from a silkscreen, a trace, or solder mask. These add height, not to mention H
Electronics Forum | Thu Jun 01 21:19:52 EDT 2006 | ec
Hi Russ, Thanks for your input. Currently, our stencil is at 5 mil thickness and the paste height from 5.5 to 6.5mil. I have increase the paste height to 7 to 7.5 mil and great improve....... I just need some data to present to my management and tel
Electronics Forum | Tue Feb 21 20:22:46 EST 2006 | mnguyen
Hi, I am having problem looking through IPC and finding according to ISO spec what should the paste height requirement vs stencil. EXAMPLE: The stencil is 5mils thick and according to the specs we have on paste height measurement the max height to be
Electronics Forum | Wed Feb 14 15:43:33 EST 2007 | CK the Flip
5/3 mil as in... 5 mils stepped down to 3 mils?
Electronics Forum | Mon Jun 18 02:15:20 EDT 2007 | pavel_murtishev
Good morning, 5mil stencil or less would be appropriate. We deal with 0402's daily and 5mil works. BR, Pavel
Electronics Forum | Wed Jul 13 19:47:06 EDT 2005 | Darby
This works for me with ENIG finish and a SAC305 NC paste Reduce all pads by -2mil on all sides ie 0.050" x 0.050" becomes 0.046" x 0.046" EXCEPT Anything smaller than 30mil; -1.5mil Anything smaller than 20mil; -1mil Anything smaller than 15mil;