Electronics Forum | Mon Apr 22 08:48:27 EDT 2002 | Bob
The main reason I would choose a QP over 2 x CP6 is speed. Depending on optimisation you can get between 25 - 28 KCPH from each CP6 but with the QP1 you are looking at 75 - 100 KCPH, for much less line length. The QP1 is approx 1 x 1/3 the length on
Electronics Forum | Fri May 03 01:25:33 EDT 2002 | gerits
Dear Sir, I do not want to mix in this "subjective" discussion but as an employee of Assembl�on (buider of FCM II, FCM multiflex 50, 75, 100) I can provide you with MTTR, MTBF, placement data (0201), software, and other (also customer) data on our e
Electronics Forum | Thu Feb 27 12:27:10 EST 2003 | stevel
Hi all, We got some bare pwb in our incoming inspecion looked really wrapped. The maximum twist of the pwb we messured is 0.056inch by following the method in IPC-TM-650 2.4.22 C. (The diagonal size of our pwb is 7.5inch) According to the IPC standa
Electronics Forum | Wed Sep 01 12:07:31 EDT 2010 | davef
Printing solder paste * Use single stroke, on-contact print cycle * Ensure the substrate is well supported, especially under areas of fine pitch print. * Select pressures of about 1- 2 lbs per linear inch of squeegee blade [Set squeegee pressure hig
Electronics Forum | Sat Mar 05 15:29:53 EST 2011 | surftech
Hello all, I've got three contact systems pick and place machines. I'm looking to purchase a new placement machine to replace and I'm interested in hearing your experience or advice on this. Here's what I'm looking for: Budget is 75-100K CPH needs
Electronics Forum | Wed May 27 13:42:08 EDT 1998 | Chrys
| R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recommen
Electronics Forum | Wed May 27 14:35:52 EDT 1998 | Justin Medernach
| | R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recomm
Electronics Forum | Fri Nov 05 10:59:30 EDT 2010 | methos1979
I have had my system for three weeks now. It is an MV3L. It is running version 4.5.0 build 2.1.2 software and it is very stable. I have not had a single crash. We are not a board manufacturer but rather use our system to inspect both populated an
