_11.jpg)
Smt I-pulse K01 nozzle used in pick and place machine Smt I-pulse K01 nozzle used in pick and place machine I-pulse series nozzles: 1.M1/M4 type:M001/M002/M003/M004/M005/M006/M012/M013/M017/M018/M019/M020/M021/M022/M031/M032/M033 2.M2 type:N001/N00
High quality SMT nozzles, cutters, filters, etc. Featured Items: Siemens Nozzles Siemens Nozzle Type 911 Siemens Nozzle Type 914 Nozzle Type 701_901 Ceramic Nozzle Type 704/904 Ceramic Nozzle Type 906 Ceramic Nozzle TYPE
Electronics Forum | Sat Jul 24 04:02:18 EDT 2004 | kent_peterson
Two ways at it.You could just put the same nozzle for both the min and max.Or you could move the feeder into a location that has similar parts using the nozzle you want. With the feeder setup it should be optimized for the least amount of nozzle ch
Electronics Forum | Sat Jul 24 04:02:21 EDT 2004 | kent_peterson
Two ways at it.You could just put the same nozzle for both the min and max.Or you could move the feeder into a location that has similar parts using the nozzle you want. With the feeder setup it should be optimized for the least amount of nozzle ch
Used SMT Equipment | SMT Equipment
JUKI KE-2070L Pick and Place Machine Specification Model :KE-2070L ■ Laser mount head * 1 (6 suction nozzle) ■ PCB Board Size： L (50*30-410*360mm) ■ Component height: 6mm ■ Component mount range: Laser Recognition: 0402(0100
Used SMT Equipment | Pick and Place/Feeders
Machine Type YS12F Applicable PCB L510mm x W460mm to L50mm x W50mm Mounting accuracy Absolute accuracy（μ＋3σ） +/-0.05mm/CHIP Mounting tact 20,000CPH（under our optimum condition） Component supply Tape reel, tray Number of
Industry News | 2012-04-06 15:32:39.0
GPD Global, a manufacturer of precision fluid dispensing systems for high-volume 24/7, low-volume/high-mix and R&D production, announces the global release of its PCD4 Dispense Pump after its successful release and testing in the North American market.
Industry News | 2010-12-07 14:53:07.0
GPD Global announces that its Positive Cavity Displacement (PCD) technology is proven with silver-filled electrically and thermally conductive adhesives.
Parts & Supplies | Turnkey Lines
Panasonic SMT Original New holder and nozzle More Panasonic nozzles available N610017373AC KME CM602 120S Nozzle N610030510AC KME CM602 206AS Nozzle N610030510AC N610030510AD KME CM602 206AS Nozzle N610040782AA KME CM402 225C Nozzle N610040783
Parts & Supplies | Assembly Accessories
Panasonic SMT Original New holder and nozzle More Panasonic nozzles available N610017373AC KME CM602 120S Nozzle N610030510AC KME CM602 206AS Nozzle N610030510AC N610030510AD KME CM602 206AS Nozzle N610040782AA KME CM402 225C Nozzle N610040783
Technical Library | 2023-08-14 09:06:53.0
In the operation of SMT mounter, the process and integrity of the nozzle of the mounter will have a significant impact on the performance of the machine. As one of the important components of the SMT machine, it is necessary for us to carry out daily maintenance and upkeep of the SMT nozzle. To ensure that the suction nozzle of the SMT machine is intact before operation, how should we do a good job of maintaining the suction nozzle of the SMT machine during normal use? KINGSUN technical team analysis operation has the following main points: 1.Wipe the surface of the SMT nozzle with a dust-free cloth. 2.The small aperture nozzle can be passed through with a thin steel wire and then blown with an air gun. 3.The surface of the nozzle should not be soaked with corrosive solution such as alcohol, as this may cause the surface to fall off. 4.HOLDER should use a cotton swab to wipe the cavity and not damage the filter screen. 5.Regular addition of special grease to HOLDER claws. 6.According to production, it is best to regularly maintain and do other maintenance regularly. (* Suitable for Yamaha SMT machine nozzles , JUKI SMT machine nozzles, Samsung SMT machine nozzles, Panasonic SMT machine nozzles, Fuji SMT machine nozzles, Siemens SMT machine nozzles etc.) Regarding the SMT machine nozzle daily maintenance operation instructions, KINGSUN share with you here , hoping to be helpful to you. More information about Products please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com , thanks.
Technical Library | 2023-07-22 02:26:05.0
Patch offset; Uneven patches throughout the substrate (each substrate is offset in a different way); Only part of the substrate is offset; Only certain components are offset; The patch Angle is offset; Component absorption error; Laser identification (component identification) error; Nozzle loading and unloading error; Mark (BOC mark, IC mark) identification error; Image recognition error (KE-2060 only); Analysis of the main reasons for throwing material. More information about KINGSUN please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com
QXJ-NC32 SMT pick and place nozzle cleaning machine In the field of the semiconductor industry today, with the development of SMT, small parts into small, high-density mounting and base for reality, and future development trends will be further co
BTW, we have sepcialzied in SMT field over 12 years and support one-stop SMT solution for our customers. Including SMT equipment and spare parts, such as Loader and Unloader, Reflow oven, Nozzle, feeder, motor, PCB board ect. We can also customize
SMTnet Express, June 14, 2018, Subscribers: 31,125, Companies: 10,958, Users: 24,820 Unlocking The Mystery of Aperture Architecture for Fine Line Printing Clive Ashmore; ASM Assembly Systems The art of screen printing solder paste for the surface
1st Place Machinery Inc. | http://www.firstplacemachinery.com/firstplace_vitronics_xpm3_820.html
Vitronics XPM3 820 Vitronics XPM3 Reflow Oven - Clean and Ready to Run Equipment Description Vitronics Model Number: XPM3i820 Serial Number
| http://www.feedersupplier.com/sale-29527961-panasonic-pick-and-place-nozzle-n610043814ad-235c-nozzle-smt-nozzle.html
PANASONIC Pick And Place Nozzle N610043814AD 235C Nozzle SMT Nozzle Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
