Industry Directory | Manufacturer
The leader in high power programmable AC to DC power supplies.
Industry Directory | Distributor
HanKook F.A is buying and selling Used PCB assembly machine(Panasonic, Fuji, Universal, Dynapert, TDK, Sanyo..
New Equipment | Coating Equipment
Cost-effective Solutions for Conformal Coating New cost-effective, automated Conformal Coating System (SimpleCoat TR) with tilt and rotate capability and excellent repeatability for just under $48,000. SimpleCoat basic model without tilt and rotate
New Equipment | Assembly Services
Parameter name / model specification / type UL330 UL445 UL530 UL535 Supply voltagePower Supply: AC220V/50/60HZ Supply pressureAir Supply: 5kgf/c㎡ PCB size (mm): 330*50~250 445*50~330 530*50~390 535*50~460 PCB direction: Left to right( opetio
Electronics Forum | Tue Aug 16 07:51:16 EDT 2011 | a
C-SAM is a non-destructive alternative that a lot laboratories and chip manufacturers use. Dye and Pry would work I suppose although I have never done it in practice with PoP but it should be any different for PoP.
Electronics Forum | Tue Nov 07 06:06:57 EST 2006 | Tyrone Hudish
Use a Ekra printer!
Used SMT Equipment | Pick and Place/Feeders
Refurbished YAMAHA YS12 Pick and Place Machine Model YS12 YS24 Applicable PCB L510x~W460mm to L50x~W50mm L50mm x W50mm to L700mm x W460mm Mounting Capability 36,000CPH 72,000CPH Mounting Accuracy +/-0.05mm/CHIP +/-0.05
Used SMT Equipment | Chipshooters / Chip Mounters
Hello and thank you for your interest in our (2) FUJI CP43 and (1) FUJI IP3 Machines For Sale. These(3) machines are being sold together in package. The equipment just came out of a Military Defense Electronics Manufacturing Company. It is in good co
Industry News | 2023-03-30 22:45:02.0
Taoyuan, Taiwan (February 27, 2023) – Heller Industries, a leading provider of reflow and curing ovens for SMT and semiconductor advanced packaging, today announced the opening of a new office in Taoyuan, Taiwan, to meet the growing demand for reflow and curing equipment in the Taiwan region.
Industry News | 2023-06-12 21:14:11.0
The 2023 Beijing Intelligent Manufacturing and SMT Technology Exchange Conference, hosted by the Intelligent Manufacturing Committee of the Beijing Electronics Society, was successfully held in Beijing on May 25th. HELLER was honored to be invited and actively participated by sharing their cutting-edge technology and expertise.
Parts & Supplies | SMT Equipment
Upper and lower motor scraper(155804/155806) Description: DEK motor scraper down FRONT / REAR SQY STEPPER MOTOR LOOM BOM Part NO.: 155804/155806 Applicable models: Applicable models: GS / GSX / LT / ELA / HORIZON/ELAI/HOZ-02I if need more
Parts & Supplies | Screen Printers
Name: CA-521; P1405; MPM camera bulb holder and connection Part No.: CA-521; P1405 Description: CA-521; P1405; CA-521 MPM camera and connect the bulb holder, original new Applicable models: UP; AP Printing Presses P1405; CA-521 MP
Technical Library | 2023-01-17 17:50:59.0
Heller's new Condenser Tube Flux Recovery System is designed to provide more efficient flux collection than earlier Heller flux collection systems; while providing minimal down time for inspection and cleaning. The entire system easily fits within the rear of the top shell of an 1800-EXL oven. The system utilizes a different set of top shell caps specially designed to provide the best serviceability of both the flux collection system and maintenance of the heater zone blower motors.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
http://www.gpd-global.com GPD Global expands the performance of its automated dispense systems to run fundamental Pick & Place operations. The same automated fluid dispensing machine is capable of dispensing fluids and also Pick & Place simple compo
Cost-effective Solutions for Conformal Coating New cost-effective, automated Conformal Coating System (SimpleCoat TR) with tilt and rotate capability and excellent repeatability for just under $48,000. SimpleCoat basic model without tilt and rotate
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS)
The Certified IPC/WHMA-A-620 Specialist (CIS) training focuses on cable and wire harness fabrication and installation.
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Thu Jun 01 00:00:00 EDT 2023 - Thu Jun 01 00:00:00 EDT 2023 | Aguascalientes, Mexico
Aguascalientes Expo and Tech Forum
Events Calendar | Tue Aug 15 00:00:00 EDT 2023 - Tue Aug 15 00:00:00 EDT 2023 | Livonia, Michigan USA
Michigan Expo and Tech Forum
Career Center | , | 2001-05-16 15:58:28.0
Fast growing, well funded, manufacturer with leading edge technology seeks process development engineer or technician. Must have experience developing processes for new products. - adhesive dispensing - reflow - profiling - screen print - cleaning
Career Center | Portsmouth, New Hampshire USA | Production
Assembly: * Must be mechanically or electrically inclined * Perform a wide variety of assembly / erecting operations and procedures, i.e. bearing fits, drilling / tapping, hydraulic / lube/pneumatic. * Must be able to read blueprints or schematics
Career Center | BANGALORE, India | Engineering,Maintenance,Production
Hi, I have 8 years experience in electronics manufacturing company. I have good knowledge in SMT process and equipment maintenance.i successfully completed more than 200 NPI's. I have good knowledge in SMT machine programming and maintenance
Career Center | Grand Rapids, Michigan USA | Engineering,Maintenance,Management,Production,Research and Development,Technical Support
""
reliability of solder joints has become a major i
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/editing-a-footprint-and-saving-to-a-diff-library_topic1291.html
Editing a footprint and saving to a diff library - PCB Libraries Forum Forum Home > PCB Footprint Expert > Questions & Answers New Posts FAQ Search Events Register Login Editing a footprint and saving to a diff library
Blackfox Training Institute, LLC | https://www.blackfox.com/ipc-certification/ipc-whma-a-620/
Blackfox Training and Certification for IPCWHMA A 620 Skip to content Blackfox Premier Training & Certification +1 (888) 837-9959 Search: Course Calendar Course Calendar 2024 IPC Certification IPC Courses IPC-A-600 IPC 7711/7721 IPC-A-6012 IPC 7711/7721 Recert IPC-A-610 IPC/WHMA-A-620 IPC-A-610 Recert IPC/WHMA-A-620 Recert J-STD-001