Electronics Forum | Wed May 07 09:02:29 EDT 2003 | cyber_wolf
I was wondering if anyone has done a study on thermo couple attachment with light cure adhesive.I have read all the papers and articles about aluminum tape, Kapton, and high temp solder.I have yet to hear anything regarding the accuracy of light cure
Electronics Forum | Wed Feb 01 02:11:38 EST 2017 | Rob
Hi Joshua, No, the adhesive lasts 2 or 3 runs. The adhesive is put on manually as is the kapton. It's a big panel for a flex - nearly 300 x 210, so the operator loading the boards onto the pallet and fixing them (then into a buffer) stays well ahe
Electronics Forum | Fri Sep 10 11:27:18 EDT 2004 | rlackey
Hi John, We use Spray mount adhesive on durastone pallets, then kapton tape on the egdes. We have produced upto 25K flexi PCB's a day with this method. The trick is to get just the right amount on the pallet, to maintain tackiness. Cheers, Rob.
Electronics Forum | Tue Jan 31 19:32:18 EST 2017 | jgo
Hi Rob, So do you have to constantly remove the old adhesive and spray on new ones? Is that an automated process? Also for the kapton tape removal and application, is that automated as well?
Electronics Forum | Fri Apr 29 15:14:52 EDT 2022 | glasscake
second the kapton tape. Another tape we use alot of is powder coat tape (a tan color) because it has excellent heat resistance and a good adhesive that does not leave residue.
Electronics Forum | Thu Feb 25 10:21:49 EST 2010 | jdumont
My guess would be that the adhesive used on the dots contains silicone. We use 1B73 which is also acrylic and it hates silicone. We use silicone RTV to permanently mask around some connectors and unless its fully cured before coating it will cause l
Electronics Forum | Mon Dec 27 10:03:35 EST 2010 | duso02
Contact your distributor for the coating or Humiseal directly. Humiseal has had a recent issue with batches of 1B31. The specific problem is lack of adhesion, which is what you have as well. You need to find out if your batch # is one of the affected
Electronics Forum | Tue Apr 23 11:46:29 EDT 2002 | tombr
Howdy Netter's I was talking with my Paste and Flux Supplier about concerns of conforaml coating over "No-Clean" flux. Supplier informs me that this should not be a problem, but I wanted to poll the industry. 1. Does anyone here conformal coat ove
Electronics Forum | Tue Feb 17 22:49:14 EST 2009 | davef
Try: acrylic adhesive Klapton tape [google for a source] It too is more expensive than the silicone adhesive tape. So, your buyer will keep trying to sneak the cheapo stuff in on you. We had to write a procurement specification and they still wont q
Electronics Forum | Mon Apr 28 09:53:10 EDT 2003 | kmorris
I've got a set of apertures on a stencil that I would like to "plug" or block off. In the past we've done this with Kapton tape, but since this location is close to a fine pitch component, the thickness of the tape prevents good gasketing at the fin