This oven is used for electron production and maintain of SMT technique. The product adopts the far-infrared heating components and excellent sense temperature materials. Through the precise control of the microcomputer, make the temperature control
The R1816 infrared reflow oven is used for electron production and maintain of SMT technique. The product adopts the far-infrared heating components and excellent sense temperature materials. Through the precise control of the microcomputer, make the
Industry News | 2021-12-26 20:13:58.0
1. Reasons of High Temperature Breakdown 1.1 Environmental Factors Ambient temperature may not be the main cause of high temperature shutdown, but it is often the inducement of compressor high temperature shutdown. Generally, technicians have a design operating environment temperature (30-40 ℃) when designing compressors. When the air compressor is operated under the designed operating environment temperature, its maximum temperature is close to the protection temperature of the air compressor.
Industry News | 2021-05-31 21:38:35.0
It goes without saying that correct dimensional measurement is a key factor in manufacturing. Performing measurements with the same reference throughout all processes from material reception to processing, assembly, inspection, and shipping make it possible to create products that match the design exactly and to guarantee product quality. Thus, it is essential to perform correct measurements throughout every step of the manufacturing process. Correct measurements can be done by making sure that all those involved in manufacturing are skilled in measuring, and that the measuring instruments are correctly managed and used.
Electronics Forum | Mon May 30 09:11:15 EDT 2011 | davef
3a ANSI/J-STD-001: * Temperature and Humidity: 18-30°C, 30-70%RH ** If out of range, shall verify electrostatic discharge control program according to ANSI/ESD S20-20 is adequate. ** For process control, more restrictive temperature and humidity lim
Electronics Forum | Thu Nov 01 22:19:57 EDT 2007 | lvzhu
The solder that we used is kester EM918 and Multicore LS328. Our printer machine is DEK-photon, this machine has supply below 300mm/s. the datasheet solderpaste of speed range is 30 to 150mm/s. when we produce the keyboard of the moble phone, this bo
Electronics Forum | Tue Jan 16 21:27:56 EST 2001 | davef
No we do not use such a storage unit. We say our preferred environment is within: * 30%RH / 84�F * 30%RH / 72�F * 70%RH / 78�F * 70%RH / 68�F J-001C says [words to the effect of]: * At 30%RH and below you�d better make sure your ESD control program
Electronics Forum | Tue Jan 10 16:01:20 EST 2017 | davef
A review document for J-STD-001F with Amendment 1 had the following wording, but you should check the actual document to be sure of correctness 4.2 Facilities Cleanliness and ambient environments in all work areas shall [D1D2D3] be maintained at le
Electronics Forum | Mon Jun 17 21:16:19 EDT 2002 | davef
You�re correct about J-001. It�s interesting though, I find no references to controlling temperature and humidity as an element of an electrostatic discharge control program in the following: * ANSI/ESD S20-20 * "ESD Program Management" by Ted Dan
Electronics Forum | Wed May 03 20:04:21 EDT 2000 | Dave F
Joe: Hey, just hose everyone down with water when your humidity starts to decrease to below 40%. ;-) Actually, that�s how some humidity controllers work, when added to your heating system. Well basically that�s how they work. I�m not tryin� to