PCB pad circuit repair using epoxy. Using multiple angles including overhead and from both right and left angles the BEST instructor staff demonstrates plainly how to repair a PCB pad using the epoxy method. This method is per IPC 7721 4.4.1. http://
Industry News | 2009-10-17 09:43:47.0
Reduce PCB Repair Costs
Industry News | 2013-09-03 11:52:21.0
BEST's EZReball(TM) reballing preforms now are available as standard in 3 business days. Expedited packs are in available in 24 hours to help you with your reballing projects
WL 66O is one part 100% solid, dual cure UV bonding adhesives, which has been designed for wafer-level lens or optical lens attachment. It can be cured by UV in a few seconds to achieve fast fixing purpose, then further cured by thermal cure to achie
Polyimide Film Stiffener ( Brown/Black) Halogen free Polyimide film stiffener is made of high heat resistant and high adhesive adhesive coating on PI film substrate,and the thickness is from 1mil to 10mil. The excellent properties of heat bonded to e
Industry Directory | Consultant / Service Provider
Assembly process optimization and training .
Technical Library | 2013-02-07 17:01:46.0
Silicone contamination is known to have a negative impact on assembly processes such as soldering, adhesive bonding, coating, and wire bonding. In particular, silicone is known to cause de-wetting of materials from surfaces and can result in adhesive failures. There are many sources for silicone contamination with common sources being mold releases or lubricants on manufacturing tools, offgassing during cure of silicone paste adhesives, and residue from pressure sensitive tape. This effort addresses silicone contamination by quantifying adhesive effects under known silicone contaminations. The first step in this effort identified an FT-IR spectroscopic detection limit for surface silicone utilizing the area under the 1263 cm-1 (Si-CH3) absorbance peak as a function of concentration (µg/cm2). The next step was to pre-contaminate surfaces with known concentrations of silicone oil and assess the effects on surface wetting and adhesion. This information will be used to establish guidelines for silicone contamination in different manufacturing areas within Harris Corporation... First published in the 2012 IPC APEX EXPO technical conference proceedings.
Pyralux® LF Copper-clad Laminate DuPont™ Pyralux® LF has been an industry standard in high reliability applications in the avionics industry for over 30 years and has a proven record of consistency and dependability and is ideal for aerospace and m
New Equipment | Solder Materials
The Malcom TK-1 Tackiness Tester is widely used to help our customers predict solder paste tack time, limiting the potential for dropped components, using either the IPC, Depth Method, or JIS Standard Test. These three convenient testing methods for
New Equipment | Assembly Services
Edge Plating does not have a set definition per IPC. However, the industry generally accepts this as being copper plating that continues from the top and bottom surfaces and along one or more perimeter edges. Edge Plating can be used for a variety of
IPC is the trade association for the printed wiring board and electronics assembly industries.
Training Provider / Events Organizer / Association / Non-Profit
3000 Lakeside Drive, 309 S
Bannockburn, IL USA
Phone: 847-615-7100