Industry Directory | Manufacturer
AIM is a leading global manufacturer of solder assembly materials for the electronics industry.
Industry Directory | Distributor / Manufacturer
eTECH Supply is a distribution company focused on the needs of Printed Circuit Board Assembly & Repair industry.
AIM Lead Free Bar Solder SN100C - sold in a package that includes 25 individual 1 lb bars of solder. Sorry we can not break a pack of 25 and only sold in multiples of 25 lbs. AIM solders, AIM lead free bar solder, AIM no clean solder paste, AIM wire
New Equipment | Solder Materials
SN100C is a lead-free solder alloy developed by Nihon Superior in Japan that is comprised of tin-copper-nickel + germanium. SN100C offers user-friendly properties and has been proven in commercial production since 1999. The result of these advantages
Electronics Forum | Tue Jun 27 08:38:03 EDT 2006 | cuculi54986@yahoo.com
I tried some SN100C from AIM... On only one array. It flowed well on the chips but did not like the finish on the SOT23's on the board. I did not have enough arrays to mess around, so we switched it over to SAC305 and had no issues. I'm guessing w
Electronics Forum | Tue Jun 27 10:30:54 EDT 2006 | russ
Aj, Did you switch from SN100C to the SACX? Russ
Used SMT Equipment | Soldering - Wave
Make: Speedline Technologies Model: Vectra Elite Vintage: 2006 Description: Wave Soldering Machine Notes: Lead-Free Includes Approx 1800 LBS SN100C 3 Bottom-Side Heaters 1 Top-Side Heater Condition: Complete & Operational Availability: May
Used SMT Equipment | Soldering - Wave
Vitronics Wave Soldering Machine Model: Delta 6622C Vintage: 2006 Lead-Free (SN100C) Internal Dual Spray Fluxer (2) Bottom-Side Convection Preheat Zones (1) Bottom-Side Cal Rod Preheat Zone (1) Top-Side IR Preheat Zone Cast Iron Solder Pot Mix of L a
Industry News | 2003-05-28 08:20:13.0
Aiming to promote its environmental activities on a global basis, the use of lead-free solder conforms to the European Union's regulation on restrictive use of toxic substances.
Industry News | 2011-11-03 21:52:00.0
By davef: I was fortunate to be able to attend the SMTAI Exhibition Oct. 18-19, 2011. While I was walking around looking at the booths and talking to the exhibitors, I got this idea that I would report back on things that I found interesting. You know spread the news, since not everyone was there.
Solder Wave Nozzle for a Vectra 450/F, Melonite Coated, Very little use, Very Good Condition, Was Used with SN100C, N2 compatible. Cost new over $3k. Thank you Ed AssuredTech@yahoo.com
Titanium Flow Duct for a Vactra 450/F Solder Wave, Great condition, Was used with SN100C.
Technical Library | 2008-03-31 21:35:36.0
While the situation varies from country to country, nearly one year after the EU RoHS Directive came into force implementation of lead-free solder is progressing steadily. For lead-free soldering to be considered successful it is not sufficient just to have dealt with the challenges of mass production. It is also necessary to establish that the soldered joints produced are at least as reliable as those made with Sn-37Pb alloy. In this context "reliability" means the length of time in service that the initial functionality of the joint can be maintained. In this paper we will discuss some of the issues involved in solder joint reliability through a comparison of the properties of two alloys that are widely used for lead-free wave soldering, SAC305 (Sn-3.0Ag-0.5Cu) and the Sn, Cu, Ni, Ge alloy SN100C.
Technical Library | 2012-11-27 14:06:48.0
Quality managers and line supervisors are routinely tasked with the responsibility of ensuring that the hand soldering process is under control. The method most commonly used is to measure the idle tip temperature of the soldering station and to use this reading as a benchmark of system compliance. This method, although popular is now being seriously questioned by many industry professionals as being irrelevant in qualifying true system process control. This document aims to present a practical view of what factors are important for successful hand soldering and to suggest an alternative procedure for qualification that is simple, repeatable and directly related to the effectiveness of the soldering station.
SN100C P810 D4????????? ???????????? ??????????????????????????????????? ?????????????? ???http://www.nihonsuperior.co.jp/
Training Courses | ONLINE | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Thu Oct 28 00:00:00 EDT 2021 - Thu Oct 28 00:00:00 EDT 2021 | ,
Juarez Chapter Webinar: Pin in Paste
Events Calendar | Mon Mar 18 00:00:00 EDT 2019 - Mon Mar 18 00:00:00 EDT 2019 | ,
Webinar: Stencil Design for Solder Paste, In Process Inspection & Process Defects
Career Center | Rocklin, California USA | Production
General Overview of Position With this new position Parallax aims to improve our USA manufacturing throughput in a time when most companies normally only send work offshore. This raises the standard for requiring efficient use of our Pick and Place
Career Center | hyd, andhra pradesh India | Engineering,Production,Research and Development,Technical Support
i have a experience in smt and i acan operate europlacer and mydata machines.
Career Center | chennai, Tamil nadu India | Engineering,Production
KEY SKILLS; 1.PRINTING, PICK AND PLACE MACHINE OPERATION, 2.REFLOW OVEN CHARACTERISTICS, 3.IPC STANDARD,QUALITY POLICIES 4.AOI PROGRAMMING 5.c,c++LANGUAGES. 6.VerilogHDL. 7.ORCAD,PSPICE software known.
High Reliability Lead-free Solder SN100C(Sn-0.7Cu-0.05Ni+Ge) High Reliability Lead-free Solder SN100C(Sn-0.7Cu-0.05Ni+Ge) While the situation varies from country to country, nearly one year after the EU RoHS Directive came into force
Lewis & Clark | https://www.lewis-clark.com/product-tag/aim/
AIM Archives - Lewis and Clark, Inc. Skip to content My Cart: $ 0.00 0 View Cart Checkout No products in the cart. Subtotal: $ 0.00 View Cart Checkout Lewis and Clark, Inc
| https://www.smtfactory.com/Solder-Bar-pl3991858.html
| Antioxidant Silver Soldering Tin Lead Free SN100C Solder Bar for Solder Wave More >> Keep in touch +86 136 7012 4230 info@smt11.com etasmt@foxmail.com Contact Us Contact Us Visit Us Quick Links FAQ Join Us Training Privacy policy SMT Dictionary Social Responsibility Sales Delivery Terms Service