Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Industry News | 2018-04-09 19:51:33.0
SMTA Europe announces Session 2 Technical Program on Reliability of Soldered Alloys at the “Electronics in Harsh Environments Conference” to be held in Amsterdam, Netherlands, on April 25th, 2018.
Industry News | 2018-03-29 20:48:41.0
SMTA Europe announces Keynote Speaker Ralph Tuttle of Cree, Inc. on High Power LED Solder Joint Reliability at the “Electronics in Harsh Environments Conference” to be held in Amsterdam, Netherlands, on April 25th, 2018.
Industry News | 2011-08-30 19:41:37.0
The SMTA announced two sessions on Alternate Lead-Free Alloys featured during their annual conference, SMTA International, taking place October 16-20, 2011 in Ft. Worth, Texas.
Industry News | 2023-03-16 14:31:59.0
The SMTA is pleased to announce the Best Papers from SMTA International 2022. The winners were selected by members of the conference technical committee. For these exceptional achievements, a plaque is given to primary authors of all winning papers.
Industry News | 2019-01-30 08:13:02.0
The SMTA is pleased to announce the Best Papers from SMTA International 2018. As speakers at SMTA International, individuals make contributions to the industry by sharing their research and findings. For these exceptional achievements, a cash award and plaque are given to all winners.
Industry News | 2015-01-07 15:52:18.0
The SMTA is pleased to announce the Best Papers from SMTA International 2014. As speakers at SMTA International, individuals make contributions to the industry by sharing their research and findings. To reward exceptional achievement, $1,000 awards and plaques are given for the Best of Conference Presentation, Best of Proceedings Paper, and the Best International Paper.
Industry News | 2020-03-19 13:12:42.0
The SMTA is pleased to announce the Best Papers from SMTA International 2019. As speakers at SMTA International, individuals make contributions to the industry by sharing their research and findings. For these exceptional achievements, a cash award and plaque are given to primary authors of all winning papers.
Industry News | 2022-01-10 16:55:15.0
The SMTA Capital Chapter Officer team is excited to provide our members with a free technical webinar on "Use of Photonic Soldering to Rework Chip Components" presented by Dr. Vahid Akhavan, Global Application Engineer at NovaCentrix. The presentation will take place on January 20th at 12:00am EST.
Industry News | 2015-02-04 18:05:58.0
he SMTA Capital Chapter is pleased to announce its first meeting of 2015 on March 17th, scheduled from 5:30 pm to 8:00 pm at EIT (Main Building Lunchroom), 108 Carpenter Drive, Sterling, VA 20164. The focus of this chapter meeting will be “Elimination of Pb-Free Risk by Robotic Hot Solder Dip (RHSD)” presented by Donald Tyler, Managing Director, Corfin Industries.