Industry Directory | Distributor
Mayer Alloys stocks and supplies a complete line of tin and lead based alloys and lead free alloys.
Industry Directory | Manufacturer
manufactures solder preforms , hermetic covers , heat spreaders and custom welded assembllies
New Equipment | Solder Materials
The KappZapp7 - 7% Silver formula is an audio industry standard for vehicle and home theater speaker installations. Its 7% Silver content requires a higher temperature range, but yields superior strength and vibration resistance. Low melting temper
Lead Tinning is an important aspect when components need to withstand adverse conditions for extended periods. Lead Tinning can also be used in the restoration of corroded components to their original condition. V-TEK meets or exceeds Mil standards.
Electronics Forum | Fri Oct 13 10:35:06 EDT 2006 | patrickbruneel
I just hope that lead-free alloys will only be used in tropical climates and above 13 C. Check here: http://materials.open.ac.uk/srg/srg_tp.htm Patrick
Electronics Forum | Fri Oct 13 11:55:23 EDT 2006 | patrickbruneel
I just hope that lead-free alloys will only be used in tropical climates and above 13 C. Check here: http://materials.open.ac.uk/srg/srg_tp.htm Patrick
Used SMT Equipment | Soldering - Selective
Make: Nordson Model: Select Novo 102 Vintage: 2020 Description: Selective Solder Details: Lead-Free Titanium Solder Pot & Pump Assembly Solder Pot Capacity: 30 lbs Software: SWAK-OS 4.0 (Includes Automated Fiducial Alignment, Board Warp Compensa
Used SMT Equipment | Soldering - Reflow
A8N Main electric part uses international brand components. Temperature control design achieves international advanced level with stable and even temperature. It is suitable for soldering CSP, BGA component. Energy-saving inner oven design and heat
Industry News | 2016-11-22 17:42:42.0
During the 2016 Annual Meeting at SMTA International, the SMTA announced that Kate Reeve, a graduate student at Purdue University, has been selected as the recipient of the 2016 Charles Hutchins Educational Grant. The SMTA Grant Committee selected her project entitled "Heterogeneous Nucleation of ß-Tin in Lead-Free, Tin-Based Solder Alloys."
Industry News | 2020-01-08 16:51:58.0
The SMTA Capital Chapter is excited to host a Chapter Meeting on February 20th from 5:00 PM to 7:30 PM at PACE Worldwide in Elkridge, MD. Jason Fullerton, MacDermid Alpha Electronic Solutions, will be presenting “Advances in Lead-Free Solder Technologies for High Reliability Applications.”
Parts & Supplies | Board Cleaners
engine accessory ai rubber hose silicone rubber hose combusition engines Specifications high quality custom cnc machining aluminum metal part products Item high quality custom cnc machining aluminum metal part products Material Stainless Steel
Technical Library | 2023-01-17 17:22:28.0
The impact of voiding on the solder joint integrity of ball grid arrays (BGAs)/chip scale packages (CSPs) can be a topic of lengthy and energetic discussion. Detailed industry investigations have shown that voids have little effect on solder joint integrity unless they fall into specific location/geometry configurations. These investigations have focused on thermal cycle testing at 0°C-100°C, which is typically used to evaluate commercial electronic products. This paper documents an investigation to determine the impact of voids in BGA and CSP components using thermal cycle testing (-55°C to +125°C) in accordance with the IPC- 9701 specification for tin/lead solder alloys. This temperature range is more typical of military and other high performance product use environments. A proposed BGA void requirement revision for the IPC-JSTD-001 specification will be extracted from the results analysis.
Technical Library | 2007-08-16 13:34:31.0
While experienced inspectors may be able to determine the aesthetic differences between a lead-free PCB assembly and a tin-lead version, one cannot rely on the "experienced eye". "Less wetting out to the pad edges" (Figure A) and "graininess and lack of shininess of the solder joint" (Figure B) are typical comments about some lead-free solder joints. However, in cases where a Nitrogen atmosphere was present during the reflow of the solder joint (Figure C), there will be little visual differences between the lead free alloys and their tin-lead counterparts.
ACI Technologies Inc. (ACI) is a scientific research corporation dedicated to the advancement of electronics manufacturing processes and materials for The Department of Defense and industry. This video provides an overview of our commercial service
http://www.pcb-separator.com/html/PRODUCTS/PCB%20separator/2015/0610/157.html http://www.pcb-separator.com/ PCB Separator supplier/PCB Separator factory/pcb cutting machine manufacturer/pcb depaneling tool/V-cut pcb separator/LED strip cutter
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Events Calendar | Thu May 17 00:00:00 EDT 2018 - Fri May 18 00:00:00 EDT 2018 | ,
Tin Whisker - All You Should Know - SMTA Webtorial
Events Calendar | Thu Oct 21 00:00:00 EDT 2021 - Thu Oct 21 00:00:00 EDT 2021 | ,
Great Lakes Chapter Webinar: Low Melting Alloy & Selection of the Right Chemistry for Reliability
Career Center | Rochester, New York USA | Engineering
I have done my undergraduate studies in Mechanical Engineering. I am pursuing my Master's Program in Electronics Packaging. I am currently working as a Research Assistant for RIT-CEMA (Center for Electronics Manufacturing and Assembly). My research
SMTnet Express, August 1, 2019, Subscribers: 32,197, Companies: 10,845, Users: 24,998 Tin Whiskers: Risks with Lead Free | Part I Credits: ACI Technologies, Inc. Tin (Sn) metal displays the characteristic of growing "tin whiskers" from pure tin
widely adopted Sn-3.0Ag-0.5Cu solder alloys for
| http://etasmt.com/cc?ID=te_news_industry,3561&url=_print
. This solder alloy is relatively cheap, has fine grains, and exhibits good solderability. However, due to the high percentage of Sn, it is also prone to tin whiskers and tin pest
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/resource-center/solder-glossary-of-terms
. Alloy A substance composed of two or more metal elements. Example: Sn96.5 Ag3.0 Cu0.5 is 96.5% Tin, 3.0% Silver, and 0.5% Copper. Generally, alloys will have different properties than those exhibited by their individual elements (e.g