Electronics Forum | Wed Mar 07 11:59:54 EST 2007 | Robbie
Hi all, > > We are looking at putting cutting > boards into our goods in area - for opening > sealed bags to check the contents and to aid in > decanting, and would appreciate any relevant > input. > > The components should never come into > d
Electronics Forum | Mon May 17 13:34:22 EDT 2010 | davef
If it's not adhesive, try an ESD-type ionizer. The objective of an ionizer is to eliminate surface charge on insulators and on isolated/ungrounded conductors. Practically speaking, the action of an ionizer is to drive the voltage on the surface of a
Electronics Forum | Wed Sep 24 17:01:04 EDT 2008 | davef
We use a Charge Plate Monitor (CPM) tp monitor the balance of our ionizers, according to ANSI ESD STM3.1. Maybe you could use a CPM to assess the ionizing radiation in your plant. The more we think about it, we feel you could use a Geiger-Mueller (G
Electronics Forum | Mon Feb 10 20:05:28 EST 2003 | joeherz
Hello, We are looking at new/used buildings and are faced with decisions regarding what type of flooring to have installed. I know a little about epoxy, vinyl tiles, rubber, paint and plain old ESD wax on concrete but don't want to re-invent the wh
Electronics Forum | Thu Aug 30 13:26:40 EDT 2012 | joeherz
Appreciate all the replies. We have a good system in place with ESD tile floor, grounded systems/benches/etc and heel and wrist strap usage and monitoring. Good training program as well. We've recently upgraded to the 2007 version of the ANSI 20.2
Electronics Forum | Tue Nov 06 10:06:33 EST 2018 | davef
Electronic Connector Industry News Resources + Surface Finishing + Metal Finishing + Products Finishing + Interconnection World (Connector Specifier) Electronic Connector Associations + IEEE USA + International Electronics Manufacturing Initiative (
Electronics Forum | Tue Oct 13 18:28:51 EDT 1998 | Graham Naisbitt
Upinder, Using IPA does not cause the residue, it simply exposes it. Given that all fluxes leave reisdues, it follows that these MUST be benign - but how do you know, and how do you control it. You are using flux to remove oxides and give you a go
Electronics Forum | Sun Sep 02 09:06:42 EDT 2018 | davef
Cold resistance between the tip of the tool and the ground reference, tip current leakage, and tip voltage. per ANSI ESD STM 13.1 J-STD-001 Rev G, Appendix “A” Guidelines for Soldering Tools and Equipment: A-2 BENCHTOP AND HAND SOLDERING SYSTEMS Se
Career Center | , California | Quality Control
Tammy T Vo P.O. Box 2213 (714) 254-5073 E-mail: nhutamvo@yahoo.com Position of Interest Senior Quality Inspector Aerospace Manufacturing. / Electronic PCBA/Advanced coating technologies Profile of Qualifications 12 years of experience wo
.png)
