Electronics Forum | Fri Jul 10 19:53:31 EDT 2015 | tamazula
make sure noting stock in the X ,and motor brake > work usually machine supply 24V to motor brake > wire for release brake then move until hit the > end stopper for init motor if brake keep on > that will the error message > > i got it ofte
Electronics Forum | Mon Jul 25 17:27:45 EDT 2016 | victoriajon
Up and running smoothly this morning, but got the attached error when switching from a reel feeder to a tray of the same part. We are getting this error message during setup - any suggestions are welcome. I am available to answer any questions that
Electronics Forum | Fri Oct 07 12:50:51 EDT 2016 | padawanlinuxero
Hello guys I am back! Guys I have a problem with the laser marker here, we use the laser to mark a 2D barcode on the pcbs for traceability, but for some reason since yesterday every time it tries to connect to the database to get the serial codes an
Electronics Forum | Thu Nov 07 16:02:06 EST 2019 | kylehunter
OK, got a lot of information today doing some testing.. Version number:- 07 SP11 (985 B02) Released Dec 8 2006 I did the tool(less) calibration of the squeegee height, which worked fine, no error. Did a test print, as you can see from the image, t
Electronics Forum | Thu Jan 13 15:08:22 EST 2022 | emeto
Hello Jeff, error is telling you exactly what it is - communication problem. CAN interface is interrupted somewhere. Motors are constantly sharing position and commands with computer over CAN interface. To get this message means somewhere this circui
Electronics Forum | Sat Aug 26 21:53:47 EDT 2017 | kieren
Hi Everyone. I am looking for some help with my Juki Ke750. The problem is that after booting up and then starting the home position function I receive an error as stated below Message File Error E0000: KEY=200078 STATUS=2 C:￥X750 ￥GX3ERROR。MSG
Electronics Forum | Tue Jul 09 15:20:19 EDT 2002 | pjc
When you look at the capabilities of Combo machines they tend to sacrifice performance when compared to separate X-ray and AOI machines, meaning they don't do either the X-ray or AOI operations as well as a machine that was designed to do only one. A
Electronics Forum | Thu Jul 26 10:31:18 EDT 2001 | akruppa
I am not sure why your link: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=7271. As a temporary solution you can preview and then select re-edit. This will allow you to add the final digit within the quotes for the link. I will make su
Electronics Forum | Mon Dec 06 10:04:53 EST 1999 | Michael Bryant
Bill, Thanks for the tip. There was an error in the printer friendly page for forum postings. We have repaired the formatting problem, so it will retain all of the paragraphs and indents that the original message contains. If you have other observat
Electronics Forum | Tue Dec 09 11:22:12 EST 2003 | Michael N
What error message are you getting with your C Axis problem? Check the battery pack on the right hand side in the front it seems to me that probaly your losing your data. BE CAREFUL NOT TO REMOVE THE BATTERY WHEN THE MACHINE IS OFF, IF NOT YOU'LL HAV
