Electronics Forum | Mon Aug 31 09:16:54 EDT 2020 | aurash
After reading the machine logs it seems that the problem is on the X-axis but the safety mechanism is disabling all the Servos and the Axis system (all axes) are in error state (that's why the error messages are showing on different axes) The JUKI m
Electronics Forum | Thu Dec 11 02:24:37 EST 2014 | vladicac
We found out what was the problem. If you happen to get the same error be sure to check if you have access to all COM ports. Also check CMOS battery. Because of low battery voltage all BIOS settings were lost. Because of that we had to reconfigure ou
Electronics Forum | Thu Jun 28 16:46:30 EDT 2018 | applebar
thank you for the reply it was our error- there was a change notice via a spreadheet in a resistor value; the operator used the old reel/old value. Customer did not pay for AOI. Customer supplied tester passed all the boards, even with the wrong (u
Electronics Forum | Fri Dec 09 01:05:11 EST 2022 | varun
We have a Mirtec MV-3U AOI machine. Can someone help me to find a way on how to save the image of the board along with the report after the inspection is complete? Currently it only saves the report with the errors showing on the template image which
Electronics Forum | Wed May 15 08:04:27 EDT 2024 | james2024
Hello, The fiber optics cable appears to be functioning correctly; transmission is evident through the blinking LEDs, and the computer can read the status of all transport sensors. I have managed to identify an error in the logs. Please use the foll
Electronics Forum | Wed Jun 24 08:40:00 EDT 2015 | bdamico
Hello Shim, You may want to consider reading this thread on the forum. http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=17947&#Message73545 I am a bit biased as I own MIRTEC here in the US, but we would be more tha
Electronics Forum | Sun Jan 20 16:42:10 EST 2008 | bentigano
I have developed an application to help the ease of image set backups for YesTech AOI systems. I'm sure many CM's like to keep their scanned image sets for future reference, and manually moving those files over and over wastes time, and increases th
Electronics Forum | Wed Apr 04 10:32:10 EDT 2018 | dleeper
At an EMS I used to work for, our process for first article inspection was to have a human technician do a point to point comparison between the BOM and the PCB. They would verify component part #s were correct per the location, correct polarity and
Electronics Forum | Wed Aug 31 08:27:45 EDT 2011 | rway
AOI if needed? I take it your AOI/AXI is not inline. Too bad. Our AOI is the first line of defense against induced errors in the mfg process. It's invaluable. How do you know it's not needed, or that it won't be needed in the future? Do you hav
Electronics Forum | Wed Jun 16 10:50:03 EDT 1999 | Clifford Peaslee
Graham, I think your problem is unrelated to the previous message. I believe there may be a problem in the Forum Application, that is causing this problem. I have known about it for a while, but not exactly sure what is causing it. If you could pro
.png)
