Electronics Forum | Fri Sep 25 20:11:58 EDT 2015 | ercdave1
Thank you for taking the time to read this post. I hope I can get some help since I am at the point where I don't know what to do. I have a Q block Universal GSM2 having some issues. I am getting an error message that reads. "spindles Not seen for
Electronics Forum | Fri Mar 30 07:14:42 EST 2001 | pteerink
Genny, Xray systems ( or at least what I have seen ) are a manual based system. That is, you put the board on the machine and look at certain locations that you want to inspect. What we have in mind is an automated system that will catch obvious, no
Electronics Forum | Fri Mar 30 07:14:51 EST 2001 | pteerink
Genny, Xray systems ( or at least what I have seen ) are a manual based system. That is, you put the board on the machine and look at certain locations that you want to inspect. What we have in mind is an automated system that will catch obvious, no
Electronics Forum | Thu Mar 29 02:14:07 EST 2001 | peterson
AOI technology is over-priced and inconsistent...lots of false errors. Your best bet is a paste height measuring device (3-D) Cyberscope makes one for 25-30 thousand. This process is really only necessary for high volume operations. As for you questi
Electronics Forum | Thu Feb 16 02:44:03 EST 2012 | fadzril
Dear all, Have anyone deal with X-Out boards? These defects are declared if one cavity or more from multi cavity boards are defective. There have been a request to use these boards in order to reduce the multi cavity board spoilage at supplier. Ho
Electronics Forum | Thu Feb 05 02:43:22 EST 2015 | sarason
Hi.. Hommer, I am not able to install the Vision > tester software for ESV304 machine. It is giving > an error in the installation "Unable to load > HINST.dll" and software asks to re-install the > same again. I tried a lot. but all in vain. > P
Electronics Forum | Mon Apr 29 08:08:57 EDT 2024 | radek
Hello, The fiber optics cable appears to be functioning correctly; transmission is evident through the blinking LEDs, and the computer can read the status of all transport sensors. I have managed to identify an error in the logs. Please use the foll
Electronics Forum | Mon Apr 29 18:56:13 EDT 2024 | radek
Si ver: 7.44(9910) Please find link to si_trans_file: https://drive.google.com/file/d/1ylvj2YydjdThmSJ40p9Jd3x_UQhV51s9/view?usp=sharing There was a problem with one of the connector and also I've changed FEED_TYPE parameter to 3 in si_trans_file and
Electronics Forum | Thu Aug 17 08:09:52 EDT 2000 | LarryK
We had an interesting problem this week that is along this thread. Had a project that had the same resistance value components, but one component was a 1% tolerance and the other was a 1/2%. Guess what? the operator got them mixed up. We have a first
Electronics Forum | Mon Apr 19 21:37:17 EDT 2021 | ouaret
dear all, update: we got that the calibration of SIM is the problem, the distance between SIMs need to be calibrated. can someone help us get the manual that describe on how to calibrate the SIMs? we have a problem with our cyberoptics AOI machine