Electronics Forum | Mon Sep 11 12:03:25 EDT 2017 | emeto
Absolutely - it is probably cheaper! Soon they might start doing it with the transistors, diodes and ICs too. Why would you need a sophisticated AOI machine then? What would quality control look for? It is annoying, considering the amount of differen
Electronics Forum | Mon Oct 30 08:47:39 EDT 2017 | philc
As an AOI operator as well, I can see your point, but what about 0402 parts, and all chip capacitors? These parts are not marked, but I presume you accept those? In relaity, an unmarked resistor is no different to any cap, and you don't worry about t
Electronics Forum | Mon Aug 27 08:36:52 EDT 2012 | rway
The process is currently being performed by hand. > I am trying to automate the process by switching > to pick and place equipment and using > AOI. > > Problem number one is getting my customer > to sign off on switching from hand assembly to >
Electronics Forum | Mon Apr 29 12:35:13 EDT 2024 | radek
Fuse was ok but the resistor which feed optocoupler was burned out. After replacing resistor everything is working fine. Now I've got error: "Infeed disbaled" - but this is configuration error ? BTW I have one more question - can I use this machine
Electronics Forum | Tue Jul 22 03:37:18 EDT 2014 | serkanxy
Please us OK/NG light. This is advace light.Especially when there are 402 black resistors and they are on dark green or balck pcb, this ligt is perfect. But, this is optional thing. You must contact with local distributor to activate this ligt.
Electronics Forum | Sat May 14 12:32:33 EDT 2016 | dilogic
Depending on the vision, there might be issues with small black parts (like 0402 resistors etc.) - we have Mirtec MV2-HTL, btw.
Electronics Forum | Fri Sep 15 09:14:55 EDT 2017 | dleeper
From my perspective, I like marked parts because I can use AOI to verify the correct parts are being placed in production. If an operator is going to load the wrong reel, I prefer to find out on the first PCB rather than after 5000 wrong parts have b
Electronics Forum | Wed Feb 26 17:05:42 EST 2003 | davef
Q1: Are the markings on resistors the actual value? A1: Generally, resistor marking indicates the value of the device, where the first two digits are the value and the third digit is the multiplier. Q2: Do AOI machines look for these markings or do
Electronics Forum | Tue Jul 25 12:39:41 EDT 2017 | emeto
Hello John, the answer of your question is more organizational than technical. Most CEM use their own part number system(you will need to purchase software for that), and that is exactly what you want to do.You can have 5 different resistors 10kOhm
Electronics Forum | Fri Feb 18 10:24:17 EST 2005 | Frank R.
We want to check for missing and misaligned component. The problem we have right now is concerning modifications. When ICT detect a problem ( missing component or a bad resistor value ) we have to remove soler, do the change and resolder. It's too
.jpg)
