Electronics Forum | Thu Jul 24 15:00:19 EDT 2008 | scooter
I use Publisher to create work instruction with pictures and text boxes containing the part numbers and descriptions of the parts for that assembly . Then use arrows to show their location on the picture If the assembly is complex you might need to
Electronics Forum | Sat Aug 18 23:03:07 EDT 2012 | eadthem
We have had this problem in the past, On paper tape resistors(old stock from before i took over and forced rotation on everything) and on embossed (national semi parts, strings of glue pulled back like seat belts across the pocket.) For the national
Electronics Forum | Tue May 05 07:28:21 EDT 2015 | sarason
That is very dependent on what components are needed for your boards. In general if you are running high volumes you talk directly to the manufacturers. If they think your 10,000 boards ain't worth getting out of bed for, they will refer you to thei
Electronics Forum | Thu Jan 16 03:43:42 EST 2003 | johnw
1st off for the forum folk, I don't like the fact that the new system only let's you see the posting your replying too, I'd rather be able to see the thread..... Anyhoo, why this alloy?, it's because it's the device manufacturers preferred and the c
Electronics Forum | Wed Mar 28 21:29:59 EDT 2007 | darby
Component. Press edit on the desired feeder #, let's say 1. The left and right arrow keys will toggle the feeder type eg 8mm, 12mm etc. Press enter The cursor will now shift to the Set No field. Enter the Set No using the numerals on the keypad. To
Electronics Forum | Sat Sep 19 11:55:19 EDT 1998 | Earl Moon
| On Friday, 18 September 1998, Moonman sayeth: | What does Indium do to children's minds? Mine is already lead saturated. Hmmm! Feels good. | Moonman | Yo' Moon dude... | I doesn't do a thing, and I know. I use ta' play cowboys and Indiums all
Electronics Forum | Mon Jan 13 21:52:16 EST 2003 | davef
Haaaaaa!!!! You contractors get all the fun don't ya??? Consider: * Replacing the balls on the corners of the devices with balls composed of a "hard solder", yano something like 90/10. * Shimming to prevent excessive collapse of a heavy BGA during
Electronics Forum | Fri Oct 31 18:08:34 EDT 2008 | m79d
thank you both for the input ok so i understand the hole is on a 5mmx5mm center the pin seems to be 3mm. About 3mm of the board goes under the clamp rail so the tooling strip must be wider than 5mm as the fiducial also needs to be on it. Mark_m yo
Electronics Forum | Thu May 14 22:45:46 EDT 2009 | davef
You're correct. It's a peculiar looking defect. With measling, we expect to see discrete white spots or crosses just below the surface of the base material. We don't see that here. We do see a similar condition at almost every PTH in the picture, a
Electronics Forum | Fri Jan 29 18:52:53 EST 2010 | cusackmusic
We bought an Ersa Hotflow 5 used a few years ago as a backup. Well, we needed a backup a few days ago, and it didn't back us up. When I turned it on, the screen on the machine is blank, and two buttons with an up and down arrow seem to turn on two
