Electronics Forum | Wed Jun 20 12:07:13 EDT 2001 | Steve
I would suggest getting a copy of IPC-SM-782A, Surface Mount Design and Land Pattern Standard, and IPC-7525 Stencil Design Guidelines. My experience is that reflow does not cause tombstoning very often. Pad and land design, paste volume, and placemen
Electronics Forum | Fri Aug 13 18:38:47 EDT 2004 | russ
Your paste manufacturer will have the best guidelines for you. Different paste types and manufacturers sometimes/usually require a little bit different setup. I would also contact your printer manufacturer. As far as stencil concerns the larger/be
Electronics Forum | Mon Aug 30 11:20:12 EDT 1999 | John Thorup
| | | Planning to evaluate the above process... | | | Can anyone can give me some tips/infos on the above.... | | | e.g. stencil aperture design, aperture ratio, common problems and solutions they encountered on the above process, is the profile diff
Electronics Forum | Mon Aug 30 12:02:16 EDT 1999 | Brian Wycoff
| | | | Planning to evaluate the above process... | | | | Can anyone can give me some tips/infos on the above.... | | | | e.g. stencil aperture design, aperture ratio, common problems and solutions they encountered on the above process, is the profil
Electronics Forum | Tue Aug 31 03:37:19 EDT 1999 | Wolfgang Busko
| | | | | Planning to evaluate the above process... | | | | | Can anyone can give me some tips/infos on the above.... | | | | | e.g. stencil aperture design, aperture ratio, common problems and solutions they encountered on the above process, is the
Electronics Forum | Fri May 14 12:13:35 EDT 1999 | Heather
| Hi Guys, | | I am going to be graced with the good luck of processing microBGA's in the near future. A bit of a step forward from printing 20-mil pitch and wave soldering 0805's, wouldn't you say? | | So, any of you folks who have already experi
Electronics Forum | Tue Mar 28 08:29:04 EST 2006 | davef
Pad design - Standard IPC 20 pitch QFP Thermal pad design - Layout the thermal pad 0mm to 0.15mm larger per side (0mm to 0.30mm larger overall) than the exposed die pad on the package. �Larger than�, as opposed to the same size, is preferred. Obvio
Electronics Forum | Sun Jan 28 13:26:27 EST 2007 | Sweet Old Bob
Okay you CM haters I don't see anything about the design of the board, other than OSP which is strike one. What is the board size? What is the board thickness? Where is the BGA located on the board? What is your ball to pad ratio? What is your aspect
Electronics Forum | Mon Mar 02 04:20:27 EST 2009 | emmanueldavid
Glossy/Matte & Plating). 2. Select Solder Paste according to Your Customer or In-House Specifications which is compatible for expected Process. 3. Use Chemical Etch / Electro Polished Stencil with proper Aspect Ratios (AR=>1.5) & Area Ratios(ArR=>0.6
Electronics Forum | Thu Apr 19 15:22:34 EDT 2001 | jdtpfacreate
Spanky, It sounds like you are looking for a recipe to use when you do get an assembly in that has 0201's on it. We have worked with our customers worldwide in the development of the process to use 0201's. Most equipment manufacturers out there