Electronics Forum | Mon Oct 17 11:16:09 EDT 2005 | slthomas
There are a lot of things that might affect your cleaning efficiency. Paste type (no clean or w/s?), cleaning chemistry, aperture aspect ratio (aperture width/stencil thickness), "linty" wipes, etc. Another thing you need to look at is the frequency
Electronics Forum | Wed May 22 12:32:49 EDT 2002 | pwrgroup
which stencil vendor can deliver aspect ratio and area ratio and the statistical information to the user?It's difficult if the pad is modified.
Electronics Forum | Fri May 17 11:10:25 EDT 2002 | wister
Is there any software to design the stencil openings? It may be including automatic modify the aperture,monitoring aspect ratio and area ratio,even let you know the whole vloume of the opening and average ratio?because the stencil design is more impo
Electronics Forum | Wed May 22 12:39:00 EDT 2002 | pwrgroup
and the two ratio is changed if you use different thickness sheet or step-down or step-up.I think real time calculator of the two ratio is very important for tranfer efficience.
Electronics Forum | Wed May 22 12:39:06 EDT 2002 | pwrgroup
Hmmm... Why would you want to to this? I > understand your concern, but why not let your > stencil house manipulate your Gerber and send you > a copy of it before they cut a stencil? Saves > you time and money. Sit down with your stencil > m
Electronics Forum | Sat Jan 04 09:02:17 EST 2003 | davef
Q1. What is the recommended stencil thickness to apply the proper amount of solder for 0603 components? A1. The proper amount of solder is determined by: * Metal content of the solder paste. * Stencil thickness. * Aperture opening. * Other factors,
Electronics Forum | Tue Feb 04 22:28:16 EST 2003 | davef
You could reduce the paste by about 70%. Solder balling and tombstoning will be the issues to fight. The drivers to these don't change with the component size. Use the fine SMTnet Archives for background. Aperture Size and Thickness of Solder Pas
Electronics Forum | Fri Feb 15 12:51:30 EST 2013 | emeto
Hi MikeS, I didn't post all the information, because I didn't want to mislead you. I wanted to see your way. We tried 3mil and 4 mil stencil using type 4 paste. It was hard to get the right aspect ratio and that;s why we did it on Nickel stencil - a
Electronics Forum | Tue Dec 23 17:34:07 EST 2008 | davef
We hear you talking two main issues: 1 Solder paste release 2 Thoughts on using two passes of solder paste on the stencil 1 Solder paste release * Check your aperture & aspect ratios [Search the fine SMTnet Archives for more] * Do a better job with
Electronics Forum | Fri Oct 27 11:34:30 EDT 2000 | Steve A
Wister, I agree with the other comments as far as challenging the customer, and minding proper height/width or better yet area aspect ratios. Let's assume you need to go with a .012" stencil for arguments sake. Talk to your stencil supplier about h
