Electronics Forum | Thu Jul 15 16:49:41 EDT 2021 | tqt
Thanks kumarb. Yes, we're going to have Trans-tec onsite service very soon.
Electronics Forum | Mon Jul 19 08:57:26 EDT 2021 | sarason
The machines in CAD2CAD and the CAD2CAD format are all generated from PCBSynergy available here:- https://pcbsynergy.com sarason
Electronics Forum | Tue Aug 06 23:57:06 EDT 2019 | sarason
Send me a copy of your program file. I will see if I can spot anything. Contact me at the address on the webpage. http://members.iinet.net.au/~sarason/ sarason
Electronics Forum | Thu Jul 15 15:57:39 EDT 2021 | kumarb
Here you go: https://we.tl/t-qQkEpE8H3p Suggest to also contact Trans-tec USA for any questions that you may have about this tool or any other. As an owner of the machine from Assembleon / Yamaha - they offer support. They have been great to suppo
Electronics Forum | Thu Sep 19 16:58:45 EDT 2019 | kylehunter
So.. I thought I had fixed the issue, but it seems not. The issue that was causing the fiducials to not be found, I 100% have solved. The board was not reaching the stopper before being clamped, causing the board to be a few mm's offset. I added a de
Electronics Forum | Fri Jul 26 20:20:06 EDT 2019 | kylehunter
This week we assembled around 30 panels of a LED board, totaling around 350 boards. In doing so we had to work around a really crazy issue. 1) A board goes in, all components are placed perfectly. 2) Next board goes in, all components are around 5m
Electronics Forum | Tue Jun 24 10:25:55 EDT 2008 | jdengler
I have a Philips Assembleon Topaz (not an X or XII, just Topaz), that we got from a broker or "what have you". See your statement above.
Electronics Forum | Mon Jun 23 19:33:09 EDT 2008 | adamcrum
Hello, I have a Philips Assembleon Topaz (not an X or XII, just Topaz), that we got from a broker or what have you. I just did a complete rebuild of the head assembly after some of the shaft bearings went out and was getting ready to do the auto moun
Electronics Forum | Tue Apr 03 06:08:11 EDT 2012 | rpa
Hi, where can i place a manual tray feeder on OPAL XII - Assembleon. I tried to put the tray on rear side feeders positions and teached components array positions but an error occurred "software outlimits".
Electronics Forum | Wed Sep 04 20:29:56 EDT 2013 | saibot
We had that problem a few months ago with one of ours. Had to replace both y-axis motors and the tech said it's a common problem with the Opal-XII.
