Electronics Forum | Sat Dec 17 02:30:15 EST 2005 | manyhats
Rob, Thanks for the feedback,we've been running Mydata since 95' and within those 10 years I think we might have seen enough from them. Granted our machine is still in tip top shape we just plan to get something a little more faster and cheaper. Myda
Electronics Forum | Mon Mar 26 02:41:01 EDT 2018 | robl
Hi Reckless, If it is an Opal Xii with the 8 nozzle conversion it is a no brainer. If it's only got 4 nozzles, then it still has the advantage of being able to place down to 01005 (the 7 series is only 0402), and should be able to handle a wider r
Electronics Forum | Fri Jul 30 05:21:04 EDT 2004 | vinitverma
I would also like to add some more features of Assembleon XII platform. You had mentined that you already have GSM machine whose feeders could be used if you buy a new GSM machine. Assembleon XII machines such as Opal XII, can use GSM feeders as we
Electronics Forum | Wed Mar 28 02:27:29 EDT 2018 | robl
Hi Reckless, Depends on model of Samsung & Juki. For example you talked earlier of a Juki 750 compared to an Assembleon Opal Xii, which were different generations - a fair comparison would have been a Juki 2060 to an Opal Xii. Same with the Samsu
Electronics Forum | Sat May 19 02:42:03 EDT 2007 | vinitverma
Hi Bart, I suggest you have a look at Assembleon's OPAL XII. They have a special offer at this moment. You can select the machine with 4 heads (standard) and later if higher speed is needed, you can upgrade it to 8 heads. the machine is capable of h
Electronics Forum | Thu Dec 15 23:04:07 EST 2005 | Manyhats
Hello, we are a low volume high mixed CM looking for a new addition to our SMT depot. We are currently running 2 Mydata TP-11 Hydra and feel that this can not meet our 06' forcast and current builds. I need to make a decision whether to go with the S
Electronics Forum | Tue Jun 17 10:46:16 EDT 2014 | bestglobalsmt
When the machine loads up it gets to the 2nd to last step where it starts to load vacuum data - we get 4 pop up windows once that fails. Ea2510 Machine Start error - Machine cannot be started Es00212 APPL CPU Haandshake error Ea2504 I/O Data trans
Electronics Forum | Fri Dec 16 15:23:04 EST 2005 | Csabee
I think the Samsung SM320 is quite good machine..But I suggest that must assembly feeder cover to the feeder trolleys, because without that the tape feeders are not safe for the heads. Feeders should broke the head. chip components wrong light sett
Electronics Forum | Sat Dec 17 02:37:21 EST 2005 | manyhats
Hi, it seems like you have some experience with the SM320... How do you feel about the reliability, and consistency of it? does it generate alot of error on a run? and what do you mean about feeders breaking the head? Also you're telling me that this
Electronics Forum | Wed Dec 21 10:09:06 EST 2005 | bobpan
Russ, I agree with you that size doesnt matter. As for service engineers, The way i see it....a polished turd is still a turd. When i see a field service engineer come in to work on equipment and he is dressed up.....9 times out of 10.....he couldnt