Electronics Forum | Mon Sep 21 01:57:55 EDT 2009 | kaz
Hello All, My first visit here. I own and operate a small Industrial & Consumer Electronics Service Shop. There is more and more modules with high density fine pitch SMDs that we cannot handle. We bought PACE ThermoFlow BGA SMD station with a bunch o
Electronics Forum | Wed Apr 03 16:07:13 EDT 2013 | microaide
OK, so I think I have figured out the machine configuration for tape feeders. BTW, your procedure for retrieving the X/Y/Z coordinates for the pickup locations was wrong. So I looked it up in the Quad manual. The manual was wrong too. Correct procedu
Electronics Forum | Tue Jun 23 22:19:33 EDT 2020 | kumarb
Hi. Have an older 1809EXL that was purchased new and has sat idle for years with 270 on hours as of today. After days of testing, unable to melt fresh paste from Loctite (SAC305). The root cause after the investigation is due to one of the 2 TDM modu
Electronics Forum | Mon May 17 10:59:02 EDT 2021 | kumarb
Hi. Have an Emerald-X machine with FNC purchased refurb from Assembleon with mixed results at 3500 hours. Had it sitting idle for years due to assorted issues after their installation. Only now after much time and parts investment have the machinery
Electronics Forum | Tue Sep 28 19:22:48 EDT 2021 | kumarb
Hi. Aside from the good advice above, wish to throw in our experience with our 1809EXL. Had < 200 on-hours and the oven would not melt the assorted fresh paste we sourced from different suppliers. The s/w reported that the set temps were being
Electronics Forum | Fri Feb 05 08:34:51 EST 1999 | Nancy Vandemark
Love the picture. We are considering the PRC 1500. It combines a thermoflo unit with a MBT 250A which we currently use. Does anyone know the difference between the TF200 and the TF700? This is the first I have seen the TF700 mentioned. Also, what
Electronics Forum | Thu Jun 28 20:11:32 EDT 2007 | rfrog
Hi folks, I've been bouncing off of MyData technical support for some time on an issue with a MyData machine. Seems that this My9 likes to skip an 0402 placement at a rate of ~ 1000/million. Profile: MyData My9 Mechanical centering Midas only
Electronics Forum | Tue Jul 10 16:13:52 EDT 2007 | bk
Hi folks, I've been bouncing off of MyData > technical support for some time on an issue with > a MyData machine. Seems that this My9 likes to > skip an 0402 placement at a rate of ~ > 1000/million. > > Profile: MyData > My9 Mechanical ce
Electronics Forum | Mon Apr 25 01:11:56 EDT 2016 | devil2
Packers andIs Residential Relocation With Expert Removal Agencies Expensive? Movers Bangalore http://www.shiftingexpert.in/packers-and-movers-bangalore.html Packers and Movers Hyderabad http://www.shiftingexpert.in/packers-and-movers-hyderabad.html
Electronics Forum | Tue Jul 23 23:22:25 EDT 2002 | kenbliss
Quite an assortment of opinions and problems, I appreciate everyones input. Based on all that I created a process below that seems to me should work well to reduce these problems. There seems to be plenty of blame to go around for everyone in the f
.jpg)