Electronics Forum | Wed May 05 15:31:14 EDT 2021 | edhare
0.5 to 1 micron is typically too thick and can result in gold embrittlement of the solder joint. Typical IG thickness is 0.18 microns. see https://www.semlab.com/papers/gold-embrittlement-of-solder-joints/ Ed Hare
Electronics Forum | Fri Dec 26 00:30:36 EST 2003 | Indy
hi, I wondering if anyone have any information on intermetallic growth in 80Au20Sn solder alloy. I have read that it has high reliability. Which bring an important question to my mind. What about Gold embrittlement ? Bye Indy
Electronics Forum | Tue Oct 07 08:38:05 EDT 2003 | davef
J-STD-001C requires removal of gold from (through-hole) component leads when the thickness of the gold layer is above 2.5 microns to prevent problems with embrittlement. The thickness of gold on an ENIG board typically is around 0.05 micron, resultin
Electronics Forum | Tue May 21 16:18:57 EDT 2019 | edhare
Interesting problem. I've seen this before on SMT device leads (see Gold Embrittlement paper at http://www.semlab.com). The AuSn4 IMC is solid at typical reflow temperatures and traps volatiles in the solder joint. One usually cannot crank the ref
Electronics Forum | Tue Dec 07 08:11:04 EST 1999 | Wolfgang Busko
Hi Russ, there�s something I don�t understand about the measures you took. I guess that TAL means time above liquidous and shortening of that time can result in bad dissolution of the protective Au-layer. The necessary time for the Au to mix with you
Electronics Forum | Fri Feb 09 20:05:15 EST 2001 | benefid
The ENIG process will yield between 3-7 micro inches (110 - 275 microns) of gold over the nickel barrier. This thickness range is pretty much the limit as this is a self limiting displacement reaction process. Once all surface nickel ions are repl
Electronics Forum | Tue Sep 09 20:32:10 EDT 2003 | davef
The maximum ratio of gold weight to solder alloy weight can be calculated, to help prevent a problem from excessive gold-tin intermetallic compound (i.e., AuSn4). For the equation and its derivation, please refer to "The Use of Capillary Action Measu
Electronics Forum | Thu Jul 27 21:57:16 EDT 2000 | Dave F
Hi Doug: Responding to your questions: � If gold over nickel is self limiting ... You didn�t say whether you gold plating was electroless or immersion. Electroless is not is self limiting. It can plate up to 5 thou. Expect immersion plated gold to
Electronics Forum | Mon Sep 13 06:23:06 EDT 1999 | Earl Moon
| | We have a product, with various PWBs, with over 600 parts each one (We are a low Volume/high mix company with an average component placement per PCB between 250 to 300 parts). This PWBs have 7 to 10, 20 mils pitch parts. We are having problems wi