Electronics Forum | Fri Feb 28 01:10:32 EST 2003 | MA/NY DDave
Hi I don't know what FR4 you are using, so check it out to make sure 125 isn't too high. I have seen this done occassionally when the PCBs have bad moisture or other problemx where baking helps prior to assembly and solder, yet I haven't seen it do
Electronics Forum | Fri Jan 21 16:50:33 EST 2005 | Board House
I work for a board house and our proceedure for this process is the following, We cover the via pads leaving the hole open and then apply the surface finish and then go back and Cover the Via with a second operation. By doing this you do not entrap
Electronics Forum | Wed Aug 17 13:57:27 EDT 2005 | ppwlee
We have encountered what appears to be mask discoloration after wave soldering. The areas of concern coincide with the areas that were exposed selectively by fixtures during wave soldering, dominated by one date code of PCB with a slightly different
Electronics Forum | Wed Aug 11 06:27:07 EDT 2021 | danisa
Hi all, The PCBA was swollen after SMD It is hard PCBA with 6 layers and SMD both sides Defect rate: ~ 5% Phenomenon: swell at the same side, same position (at 2 IC positions). Did not find any abnormality in SMD process as well as storage condition.
Electronics Forum | Mon Dec 25 08:43:35 EST 2017 | arjunkolavara
Hi , We are having Pin hole issues on the passive locations in the board after the SMT reflow process. Details: PCB surface Finish : ENIG . Solder paste : Alpha OM338 – M13 / Indium SMQ92J Location : Its Random and more on passive components. {
Electronics Forum | Fri Mar 19 16:56:42 EDT 2010 | cisridn
Both the coin and the device flange that is soldered to the coin have a gold finish. A solder preform is placed in the pocket of the coin before the device is placed prior to reflow. Solder adhere's to both surfaces
Electronics Forum | Fri Feb 09 14:04:22 EST 2018 | ameenullakhan
Hi Justin, The solder paste we are monitoring well. And there is thawing machine to make sure solder paste is not opened early, before it reaches its ambient temperature. we have got a suggestion that , it might be from PCB enig surface finish. Mig
Electronics Forum | Thu Apr 16 14:09:04 EDT 1998 | Lou Madge
Dear Collegue, A seminar tittled "Things that you should know before selecting an alternative surface finish" will be offered on Friday, April 24 (during the week of the Nepcon East show) in Philadelphia. Topic that will be discussed include: Evalua
Electronics Forum | Thu Apr 16 14:07:49 EDT 1998 | Lou Madge
Dear Collegue, A seminar tittled "Things that you should know before selecting an alternative surface finish" will be offered on Friday, April 24 (during the week of the Nepcon East show) in Philadelphia. Topic that will be discussed include: Evalua
Electronics Forum | Sat Nov 09 19:18:24 EST 2019 | richardcargill
I'd have thought that the surface finish would be pretty much the same as when printed as electroplating is monumentally thin. I've not tried plastics, but when plating metals the surface has to be pretty much perfect in order to get an attractive re
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Training Provider / Events Organizer / Association / Non-Profit
6600 City W Pkwy
Eden Prairie, MN USA
Phone: 952-920-7682
