Electronics Forum | Fri May 22 13:20:33 EDT 1998 | Earl Moon
| | | Does anyone know about low pressure/low temperature | | | ovens used for baking of moisture senstive | | | components? | | | Thanks | | I need to know from where your need came. I usually just bake in conventional ovens with specified times a
Electronics Forum | Wed Oct 14 04:01:28 EDT 1998 | Joakim Fagerlund
We have problems with achiveing a void free soldered joint when we seal different kind of packages (QFP,LCC and PGA) We think the problem partly is due to outgasing from the die-adhesive (silver-glass) Does anybody have any reccomendations what to d
Electronics Forum | Mon Jul 04 05:41:24 EDT 2016 | slouis2014
Can anybody advise what temperature can a BGA component on reel be bake and how long.
Electronics Forum | Thu Jun 11 10:02:36 EDT 2009 | dyoungquist
Our cleaning process involves the assemblies being completely immersed in the water bath of the ultrasonic cleaner. The assembly has a QFP44 on it. Customer stated that when these assemblies have been cleaned with water in the past (at a different
Electronics Forum | Wed Mar 29 04:14:49 EST 2000 | Marc
Charlie B: You mentioned that you have an air conditioned environment and a RH 0rf 50, baking the boards is predominately done when the history of the PCB delivery and / or previous storage conditions are un known. When I was with a CM, we did this a
Electronics Forum | Tue Nov 30 02:46:21 EST 2010 | libandara
We want to handle the materials such as PCB & MSD components as per IPC 1601 & J-STD-033. As such, we need a baking oven to perform this and to monitor (temperature – we have to maintain up to 200’C & humidity – below 5%)the control environment & ma
Electronics Forum | Fri Mar 26 03:25:02 EDT 2010 | grahamcooper22
HI, regarding the baking....why are you doing it every 72 hours ? How many times has each device been baked ? If you are worried about moisture in the devices the best policy is to store them correctly in dry packs or dry cabinets or bake them once j
Electronics Forum | Mon Aug 13 17:38:05 EDT 2001 | fmonette
Praveen, Once you find out the MS level of your components, you will need to track the exposure time from when the parts are initially removed from their dry bags, through test, programming, taping, and during subsequent dry storage and use of thes
Electronics Forum | Wed Aug 21 07:24:12 EDT 2002 | bayanbaru
What is the correct method to bake or cure the component?Standard baking practise by us is to place the units into oven at 125 �C for 8 hrs directly. But I was told that the correct baking practise is to cool down the Baking Oven to Room temp and onl
Electronics Forum | Tue Sep 03 18:14:35 EDT 2002 | fmonette
I have never heard about a requirement for temperature ramp-up for baking components at 125C. In general the concern for delamination with moisture sensitive components starts above 200C (peak body temp). Most important is you should bake your com