The MBT 350, from PACE, is the standard that all other rework and repair systems are measured by. The system features PACE's exclusive IntelliHeat technology and can be used with 10 different handpieces. The MBT 350 has three handpiece channels tha
Industry News | 2023-10-02 05:59:28.0
Curious about how Integrated Circuit (IC) manufacturers keep pace with fast-changing technology? Discover how automated systems are revolutionising the semiconductor industry, enhancing production efficiency and cost-effectiveness.
Electronics Forum | Fri Jun 23 10:01:35 EDT 2000 | Bob Willis
A couple of weeks back I produced a video clip for Metcal to show what happens when BGA pop or the edge of the base warps causing shorts to form. Its 2.3meg if there is enough interest in seeing this I will put it up some where for download. Bob Wil
Electronics Forum | Wed Nov 06 13:01:54 EST 2002 | cvrgirl
Hi, Has anyone experience BGA caps/plugs popped off after assembly on a double sided board? Only the caps on the primary side popped off and exposing copper. thanks! Michelle
Electronics Forum | Tue Feb 05 20:31:39 EST 2013 | hegemon
Air Vac DRS25. Hands down the best rework EQ. (my humble opinion, based on my own experience with rework EQ going back 15 years +) Right in your budget. Complete capability for rework. SMD, BGA, POP. Full profiling capability. Massive bottom heati
Electronics Forum | Mon Jun 26 23:33:20 EDT 2006 | KEN
We saw this condition over 3 years ago. It sometimes is called "champagne bubbles". The intemetalic formation is interrupted due to the micro voiding reducing mechanical strength. I discovered this on lead free test vehicles for a major computer
Electronics Forum | Mon Oct 25 21:49:14 EDT 2004 | davef
First, any results of pull or shear tests are unscientific at best. [We pop our BGA from boards with, appropriately enough, a beverage can opener.] Second, we have no have problems with your ENIG specification. Third, as with your customer, we'd e
Electronics Forum | Sun Jun 23 23:23:25 EDT 2002 | beldorian
First question - I am making an assumption that after "de-pop'ing" a BGA prior to socketing the thing to test it, the best known practice is to re-ball the thing. Is this an industry standard? Second question - If it is an industry standard, does a
Electronics Forum | Fri May 23 00:16:31 EDT 2014 | edriansyah
Hello all. I need you advice and opinion on my problem with BGA drop off from the boards. Initial defect was ICT fail, but due to some accident, the board fell off, and the BGA just pop out. After some search, I end up to conclude it is a black pad
Electronics Forum | Mon Apr 25 09:15:18 EDT 2016 | soldertools
Hi Adamjs! Flux or paste is controlled at a depth of 50-60% per cent of the ball diameter prior to placement of a BGA or to place a PoP component on to a board or other device. For more details visit us at Soldertools.net
.jpg)
