Full Site - : break out (Page 4 of 52)

Ucamco updates Gerber File Specification

Industry News | 2016-01-06 11:10:25.0

Ucamco published revision 2016.01 of the Gerber Format Specification. This revision adds new attributes for castellated holes (or PTH on the board edge) and for tooling and break-out holes.

Ucamco

Investigation of Cutting Quality and Mitigation Methods for Laser Depaneling of Printed Circuit Boards

Technical Library | 2019-09-11 23:33:04.0

There are numerous techniques to singulate printed circuit boards after assembly including break-out, routing, wheel cutting and now laser cutting. Lasers have several desirable advantages such as very narrow kerf widths as well as virtually no dust, no mechanical stress, visual pattern recognition and fast set-up changes. The very narrow kerf width resulting from laser ablation and the very tight tolerance of the cutting path placement allows for more usable space on the panel. However, the energy used in the laser cutting process can also create unwanted products on the cut walls as a result of the direct laser ablation. The question raised often is: What are these products, and how far can the creation of such products be mitigated through variation of the laser cutting process, laser parameters and material handling? This paper discusses the type and quantity of the products found on sidewalls of laser depaneled circuit boards and it quantifies the results through measurements of breakdown voltage, as well as electrical impedance. Further this paper discusses mitigation strategies to prevent or limit the amount of change in surface quality as a result of the laser cutting process. Depending on the final application of the circuit board it may prompt a need for proper specification of the expected results in terms of cut surface quality. This in turn will impact the placement of runs and components during layout. It will assist designers and engineers in defining these parameters sufficiently in order to have a predictable quality of the circuit boards after depaneling.

LPKF Laser & Electronics

Programmable Stripping Machines- Schleuniger UniStrip 2300 & PowerStrip 9550 MR

Programmable Stripping Machines- Schleuniger UniStrip 2300 & PowerStrip 9550 MR

Videos

Vice President of Product Management, Pete Doyon providing a demonstration of Schleunigers UniStrip 2300 and the PowerStrip 9550 MR at WPE

Schleuniger, Inc.

MicroLine 1000 S

MicroLine 1000 S

Videos

The LPKF MicroLine 1000 S is perfect for cutting break-out tabs and complex contours at highest accuracy. The benefits include shorter time to market and much higher quality cuts than conventional methods. The machine's UV laser is an optimal tool fo

LPKF Laser & Electronics

LPKF MicroLine 1120 S - Laser Depaneling System

LPKF MicroLine 1120 S - Laser Depaneling System

New Equipment | Depaneling

Laser Depaneling of Populated PCBs Low Cost Option for Depaneling Inexpensive Entry into UV Laser Processing The LPKF MicroLine 1120 S is perfect for cutting break-out tabs and complex contours at highest accuracy. The benefits include shorter

LPKF Laser & Electronics

Performance 2000 Web

New Equipment |  

Performance 2000 Web is an Application Services Provider (ASP) of fully integrated, closed-loop performance management tools that deliver critical information about all aspects of a company�s sales, marketing and channels operations. Performance 2000

Performance 2000

Knowledge about PCB Panelization

Industry News | 2019-11-05 22:24:42.0

Designing a PCB for automatic assembly and full production runs requires a few design changes from an initial prototype PCB run. Today most PCBs are assembled and tested with automated machines from the data from PCB drawing files. With up to 80% of a new product's cost determined by the first prototype build, avoiding late changes and designing with manufacturing in mind can have a significant impact on the product cost, reliability, and yield of a PCB design. Luckily, if some good choices are made early in the design process, designing a PCB for manufacturing is relatively straight forward with few pitfalls.

Headpcb

UniStrip 2600 - Stripping Machine

UniStrip 2600 - Stripping Machine

New Equipment | Cable & Wire Harness Equipment

Overview Schleuniger's most versatile stripping machine, the UniStrip 2600 can process many unique applications and wire & cable types, including discrete wire from 0.03 mm² up to 16 mm² (6 - 32 AWG), power cords (even multiple-conductors with diffe

Schleuniger, Inc.

Altus Assist Leading CEM with Systems to Future-Proof Production

Industry News | 2022-09-14 11:07:54.0

Contract Electronics Manufacturers (CEM) demand the very best equipment to ensure the products they produce are of the highest quality and meet exacting requirements. As a leading CEM in the UK, Axiom Manufacturing Services turned to Altus to assist with upgrading its depanelling capabilities to develop and future-proof its processes.

Altus Group

Aneryn

Industry Directory | Consultant / Service Provider / Manufacturer

We provide custom software for industry. We develop engineering projects as well. Our electronic, control and mechanical engineers are at your service. Based in Barcelona.


break out searches for Companies, Equipment, Machines, Suppliers & Information

Software for SMT

High Throughput Reflow Oven
Potting and Encapsulation Dispensing

High Precision Fluid Dispensers
PCB Handling with CE

World's Best Reflow Oven Customizable for Unique Applications
SMTAI 2024 - SMTA International

Wave Soldering 101 Training Course
PCB separator

Training online, at your facility, or at one of our worldwide training centers"