Electronics Forum | Mon Nov 14 12:11:20 EST 2005 | binhanhaokiet
We just bought a used TP9-2U, I could not do a W-wagon camera calibrate. It keep saying "Calibrate failed, can't located all point", I do not know what should I do next. I did refocus the camera but it still does not help. Please help
Electronics Forum | Thu Mar 28 16:51:00 EDT 2024 | tey422
Since you only saying it's the hydra error, then only run the hydra calibrations. Sometime the calibration can end up causing more issue if not run it correctly. I would do the hydra camera Z level (1st). If it fixes the issue then you no need to do
Electronics Forum | Mon Jul 16 13:54:53 EDT 2012 | markhoch
It's been a while since my MYDATA days, but let's give this a shot. Did you try putting the tool away and picking it back up? Make sure your Midas Head is cleaned and the tool is lubricated properly, then do a Center Base Leveling Calibration. (I t
Electronics Forum | Mon Aug 17 11:35:57 EDT 2020 | artem
Hello, I have some troubles with my MyData TP11-UFP with the precision of the placement. All the parts which are mechanically centered are slightly misaligned. Attached are some pictures of 0603 and a SOT23 part. I have made the calibration but it
Electronics Forum | Thu Mar 28 15:18:21 EDT 2024 | tey422
From the error message, might have to do with the "Z"-axis. You didn't mention you redo the calibration or not, then you should run that too. My guess would be "Z reading maybe slightly off". BTW, last time I work with those Mydata machine were bac
Electronics Forum | Tue Apr 24 02:07:27 EDT 2001 | joe
It's not so much of a change but a new investment. We have Siplace lines now, and very pleased with the performance. The reason for looking at the Mydata is to remove all the small stuff from the faster lines and reduce changeover times. The idea is
Electronics Forum | Sat Oct 03 07:26:01 EDT 2009 | cflames17
Check the reference plate on the hydra to make sure it is not cracked or delaminated. I have had problems with the glue coming loose and the plate flapping causing this same problem. check hydra camera calibrations, this to may help.
Electronics Forum | Tue Jun 12 14:28:17 EDT 2012 | dontfeedphils
It should be pretty straight forward while taking it apart, just make sure you label things, and be ready to run through every one of the calibrations after it's put back together. Oh, and have fun Bill!
Electronics Forum | Thu Aug 23 22:55:53 EDT 2012 | padawanlinuxero
Mike same problem here you need to calibrate the midas again call tech support for help or follow the instructions in the manual of the TPSys
Electronics Forum | Sun Dec 17 13:52:59 EST 2023 | tomdegas
How can I bypass the " Hydra force sensor can't calibrate" during the "Hardware Initialization" test. This is stopping me from starting the machine.
