Link: https://www.ascen.ltd/Products/mask_making_machine/ automation medical face mask machine with inner loop welding is automatic from material feeding to mask collection 1.high automation with PLC, photoelectric detection for the raw material feed
SMT On-line 3D Solder Paste Inspection If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of our products. solder paste inspection,SMT SPI,SPI machine, SPI in
Parts & Supplies | Repair/Rework
PG-P6860 Main Features： 1、 The top heater can move freely along the X, Y axis in the IR preheating area. It is good for many BGA chips distribution at different positions in the PCB board which need repair. X-shaped infrared laser can do rapid lo
Parts & Supplies | Repair/Rework
. This machine adopts industrial computer control, full automatic vision alignment system can acquire BGA and the PCB image through the CCD camera and collect them on the image positioning processing system, calculate the offset position and angle th
Parts & Supplies | Repair/Rework
PG-P6800 Main Features： 1、There are 3 independent heaters. The 1st and 2nd hot-air heaters can control multiple groups and segments temperature parameters. The 2nd heater can move up and down. The 3rd large area IR heater can preheat the PCB boar
Industry News | 2021-08-19 05:26:13.0
First, you need to do the following things before starting the servo motor.
Industry News | 2021-11-04 21:34:47.0
Hollow shaft encoder is also known as hollow encoder. When installing this type of encoders, it is necessary to avoid rigid connection with the encoder. Please refer to the instructions for the size of the installation shaft. When installing, the encoder should be gently pushed into the quilted shaft. It is strictly forbidden to knock with a hammer, in order to avoid damaging the bearing and the encoder as whole. After a hollow encoder has been used for a long time, you should check whether the screws fixing the encoder are loose.
Industry News | 2021-11-29 20:37:32.0
CNC machines is the abbreviation of "Computer Numerical Control" machines. It is an automatic machine tool with program control system. The control system can logically process the programs with control codes or other symbolic instructions, decode them and express them with coded numbers. Next, the coded numbers will be input into the numerical control device through the information carrier. After calculation and processing, the numerical control device sends out various control signals to control the action of the machine tool. CNC machine can automatically produce parts or other products according to the shape and size specified by the drawings.
1.The top heater can move freely along the X, Y axis in the IR preheating area It is good for many BGA chips distribution at different positions in the PCB board which need repair X-shaped infrared laser can do rapid location After location the elect
Industry News | 2021-12-15 20:08:31.0
Siemens pressure transmitter is a kind of equipment which converts pressure into pneumatic signal or electric signal for control and remote transmission. It can convert the physical pressure parameters such as gas and liquid sensed by the load cell sensor into standard electrical signals (such as 4 ~ 20mADC), which can be supplied to the secondary instruments such as indicating alarm instrument, recorder and regulator for measurement, indication and process adjustment.
