Advanced Nonmetallic Carbon Product and Material Technologies for the Acquisition, Directional Transport and Dissipation of Thermal Energy
Industry Directory | Manufacturer
STABLCOR is an innovative Intellectual Property company that is dedicated to solving problems through design.
New Equipment | Fabrication Services
Aluminum PCB & Metal Core PCB & LED PCB Circuit board Aluminium PCB are metal-based, copper-clad laminates with a good heat dissipation function. Usually, Aluminium PCB is refer to LED PCB board, which is the most important part of LED display and l
New Equipment | ESD Control Supplies
Composition: 34,8% cotton, 64,3% polyester, 0,9% carbon fiber Structure: carbon yarn stripe 5 x 5 mm Weight: 135g/m2 RS: 106ω - 109ω Electrostatic potencial: 0,2µC/m2 Half-charge decay time: t50[s] Screening factor: S=0,917 The average air pe
Electronics Forum | Mon Apr 29 10:42:47 EDT 2002 | Jim M.
I had problems with white residues on both WS609 and WS 3060.The WS 3060 turned out to be a carbonized material.The composition after analysis (Energy Dispersive X-ray spectrum) turned out to be tin,tin,phosphore and cloline and tin. Alpha also have
Electronics Forum | Thu Feb 09 20:12:51 EST 2017 | imarkl
Any advise about dewetting defect occurrence during 2nd pass reflow. Commonality on affected PCB having water marks near affected pad(s). Elemental composition found on affected pads without solder paste are Silicon and Sulfur. As well as in pad with
Industry News | 2018-10-18 09:37:27.0
How To Set Profile In SMT Reflow Oven
Technical Library | 2008-02-04 12:13:38.0
Engineers are always striving to make a lighter, faster and stronger PCB. In order to achieve their designs, engineers must turn to alternative materials to enhance their designs. There are many materials that allow for thermal, coefficient of thermal expansion (CTE) and rigidity. Many times if a material enables an engineer to have CTE they will have to sacrifice thermal. Currently carbon composite laminates are being used in order to achieve an ideal PCB with thermal, CTE and rigidity with almost no weight premiums.
Technical Library | 2020-10-14 14:49:14.0
In this study, the modification of an epoxy matrix with different amounts of cube-like and rod-like CaCO3 nanoparticles was investigated. The effects of variations in the morphology of CaCO3 on the mechanical properties and thermal stability of the CaCO3/epoxy composites were studied. The rod-like CaCO3/epoxy composites (EP-rod) showed a higher degradation temperature (4.5 _C) than neat epoxy. The results showed that the mechanical properties, such as the flexural strength, flexural modulus, and fracture toughness of the epoxy composites with CaCO3 were enhanced by the addition of cube-like and rod-like CaCO3 nanoparticles. Moreover, the mechanical properties of the composites were enhanced by increasing the amount of CaCO3 added but decreased when the filler content reached 2%. The fracture toughness Kic and fracture energy release rate Gic of cube-like and rod-like CaCO3/epoxy composites (0.85/0.74 MPa m1/2 and 318.7/229.5 J m
ETA Industrial Pure Water Machine ETA-DI250 If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of our products. PCBA Cleaning Machine, On-line PCBA Cleaning M
PCBA Cleaning Machine ETA-5600 If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of our products. PCBA Cleaning Machine, On-line PCBA Cleaning Machine, Stenci
Career Center | Melbourne, Florida USA | Management,Production,Quality Control
Technical Skills/Abilities: � Management � Quality Assurance � Strong Troubleshooting Skills � Strategic Planning � Employee Training � Quality Assurance � Problem Resolution � Mechanical/Technical Aptitude
SMTnet Express, January 27, 2022, Subscribers: 25,985, Companies: 11,506, Users: 27,032 Fracture Toughness Analysis of Epoxy-Recycled Rubber-Based Composite Reinforced with Graphene Nanoplatelets for Structural Applications
ASCEN Technology | https://www.ascen.ltd/Blog/mask_making_machine/list_42_2.html
complete the multi-layer composite molding of the plane mask... Read more Disposable face mask making machine Disposable face mask making machine is universal design for the production of non-woven Multi-layer face mask, it is mainly constructed by material
Imagineering, Inc. | https://www.pcbnet.com/blog/dissolving-barriers-how-water-soluble-printed-circuit-boards-could-solve-e-waste/
that dissolve in water. Promising solutions such as Soluboard, a flax-fiber-based composite material developed by Jiva Materials now exist
