Electronics Forum | Thu Oct 04 00:07:29 EDT 2018 | gaintstar
flason smt SMT spare parts: http://www.flason-smt.com/product/SMT-spare-parts-Assembleon-Controller-Bvm-5322-216-04698.html http://www.flason-smt.com/product/SMT-spare-parts-Assembleon-Control-V2-1-Rev-B-8mm-4022-594-10010.html http://www.flason-smt
Electronics Forum | Tue Feb 22 22:39:22 EST 2022 | cirsol
Hi, Sorry I didn't see your previous post. I do have an update but will answer your questions first. {So you only rebuilt the MC HDD and didn't rebuild the Station PC? Am I right ?} Yes that's correct, we only rebuilt the MC HDD but were not able t
Electronics Forum | Wed Dec 12 07:38:04 EST 2001 | smtspecialist
I have observed the same thing with solder composition in this case I am using 63/37 NC which is giving good results usualy. The liquid tin, product from MG Chemical that I used is to tinplates copper circuit on PC boards. I tried on few relays, it
Electronics Forum | Sun Apr 28 07:34:34 EDT 2002 | hany_khoga
Dear Tom : I hope I �m not too late. We produce PC motherboards with some buses exceeding the speed of 100MHz . we use no clean flux and it is OK even with the residues you can see under a microscope. But according to our own experience through a mo
Electronics Forum | Thu Sep 20 16:06:23 EDT 2007 | jmelson
Are these shorts occuring after reflow, or are they shorted on the incoming boards before stuffing? If the latter, is the fabricator doing electrical test? How are these boards getting past their electrical test? Especially if multilayer, there's
Electronics Forum | Mon Mar 05 07:53:28 EST 2018 | wolverine55
Hello All We have a Universal Model 6287A that is estimated to be about 25 years old. It has run fine for most of it's life but recently has stopped communicating with it's host computer, whenever any commands were attempted to be sent to the machine
Electronics Forum | Fri Jun 23 20:45:12 EDT 2000 | Lee
Hi Dave, You make a very good point. I think that the concern over lead is not so much in user's contact with the lead during the product's active life, but after its disposal. There is some valid concern over lead leaching out of circuit boards
Electronics Forum | Thu Jan 17 18:29:01 EST 2002 | Bill Loving
Dear Jason, Thank you for posting your request on SMTNET. Please note that ScanCAD International provides an upgrade path for all installed customers, regardless of the age of their system. Currently, hundreds of systems are installed in 37 countr
Electronics Forum | Thu Jan 17 18:33:24 EST 2002 | Bill Loving
Dear Jason, Thank you for posting your request on SMTNET. Please note that ScanCAD International provides an upgrade path for all installed customers, regardless of the age of their system. Currently, hundreds of systems are installed in 37 countr
Electronics Forum | Sat Sep 23 21:52:51 EDT 2017 | jlawson
In most cases PnP files are all that is needed for SMT program generation. BUT, it depends on origin reference of this data as exported to PnP and could be off in X,Y and rotation of image pending when PnP Data is exported. Also Rotation of parts