New Equipment | Board Handling - Storage
Effective moisture damage solution that improves yields. http://eurekadrytech.com/fast-super-dryer/tus-101 Capacity: 93 Liters Humidity Range: 10%-50% Recovery Time: Recovers to ≤ 20% RH within 2 hours after accessing door for 30 seconds or les
Technical Library | 2017-11-08 23:22:04.0
Due to the ongoing trend towards miniaturization of power components, the need for increased thermal conductivity of solder joints in SMT processes gains more and more importance. Therefore, the role of void free solder joints in power electronics becomes more central. Voids developed during soldering reduce the actual thermal transfer and can cause thermal damage of the power components up to their failure. For this reason, the company has developed a new technique to minimize the formation of these voids during the soldering process.
New Equipment | Rework & Repair Equipment
Product Details DH-A2 BGA Rework Station 1.Application Of DH-A2 BGA Rework Station Suitable for different PCB. The motherboard of a computer, smartphone, laptop, MacBook logic board, digital camera, air conditioner, TV and other electronic equi
Technical Library | 2019-10-16 23:18:15.0
Despite being a continuous subject of discussion, the existence of voids and their effect on solder joint reliability has always been controversial. In this work we revisit previous works on the various types of voids, their origins and their effect on thermo-mechanical properties of solder joints. We focus on macro voids, intermetallics micro voids, and shrinkage voids, which result from solder paste and alloy characteristics. We compare results from the literature to our own experimental data, and use fatigue-crack initiation and propagation theory to support our findings. Through a series of examples, we show that size and location of macro voids are not the primary factor affecting solder joint mechanical and thermal fatigue life. Indeed, we observe that when these voids area conforms to the IPC-A-610 (D or F) or IPC-7095A standards, macro voids do not have any significant effect on thermal cycling or drop shock performance.
Industry News | 2010-03-03 14:29:02.0
OK International (www.okinternational.com) has launched a new soldering system for PV tabbing and bussing applications proven to reduce micro cracking. The PS900 with specially designed hoof tip geometry optimizes the power delivered to the solder joint while it’s temperature-sensitive heater ensures low temperature soldering thus minimizing thermally induced stresses on cell surfaces.
Technical Library | 2014-10-30 01:48:43.0
The ultimate life of a microelectronics component is often limited by failure of a solder joint due to crack growth through the laminate under a contact pad (cratering), through the intermetallic bond to the pad, or through the solder itself. Whatever the failure mode proper assessments or even relative comparisons of life in service are not possible based on accelerated testing with fixed amplitudes, or random vibration testing, alone. Effects of thermal cycling enhanced precipitate coarsening on the deformation properties can be accounted for by microstructurally adaptive constitutive relations, but separate effects on the rate of recrystallization lead to a break-down in common damage accumulation laws such as Miner's rule. Isothermal cycling of individual solder joints revealed additional effects of amplitude variations on the deformation properties that cannot currently be accounted for directly. We propose a practical modification to Miner's rule for solder failure to circumvent this problem. Testing of individual solder pads, eliminating effects of the solder properties, still showed variations in cycling amplitude to systematically reduce subsequent acceleration factors for solder pad cratering. General trends, anticipated consequences and remaining research needs are discussed
Industry News | 2019-06-09 19:16:34.0
Thermaltronics USA including the award-winning TMT-9800S soldering robot, announces the development and introduction of a new range of new soldering tips designed specifically for difficult soldering applications.
New Equipment | Board Handling - Storage
Eureka TUS-501 Fast Super Dryer Dry Cabinet Specs: http://eurekadrytech.com/fast-super-dryer/tus-501 Model: TUS-501 Fast Super Dryer Capacity: 372 Liters Humidity Range: 10%-50% Recovery Time: Recovers to ≤ 20% RH within 2 hours after accessing doo
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Industry News | 2017-01-05 04:27:37.0
BGA Inspection & Defect Photo Album (Can be downloaded) The photo CD-ROM album featuring over 280 colour images on BGA, materials, inspection and defects and is available to allow engineers to create their own training material, PowerPoint files, process documents, technical articles and standards. The disk includes examples of the following: