New Equipment | Rework & Repair Equipment
Pin Grid Array Extractors are available in two sizes and provide a quick and safe way to extract Pin Grid Array components from their sockets. All component sizes can be accommodated, as the tool is available in two or four grip models. Adjusting the
New Equipment | Test Equipment
One platform embedded instruments for validation, test and debug (ScanWorks®) ScanWorks® tools validate, characterize and test chips and circuit boards in development, manufacturing and field service. Structural integrity tests can be re-used over t
Electronics Forum | Fri Jul 23 09:31:52 EDT 2004 | cyber_wolf
Make sure that your mesh conveyor drive chain is not jumping a sprocket tooth. This will cause the conveyor to "pop" and you will have skewed parts. I seriously doubt that it is your profile causing skew. It is more than likely something mechanical.
Electronics Forum | Tue Nov 01 12:29:35 EST 2005 | russ
I just noticed that you mention 2-5mm off, that is huge! It would seem to me that there is an external force here to move a part that far. Things such as a heavy air stream that for some reason is really hitting this part, something on the PCB unde
Used SMT Equipment | Chipshooters / Chip Mounters
sFAB-D machines have continued to evolve since their release to the market. They are able to insert parts into various panels with a wide range of support in part packaging. As an entry model, sFAB-SH machines are now added into the same product line
Industry News | 2021-09-02 06:10:22.0
MIRTEC announces the release of their comprehensive AI based Smart Factory Automation solution 'INTELLI-PRO'. This Technologically Advanced Software and Algorithm Package is specifically designed for the purpose of improving the performance and convenience of MIRTEC's complete line of AOI machines. INTELLI-PRO consists of a proprietary Deep Learning based Automatic Part Search and Teaching function, and AI based; Automatic Parameter Optimization, Character Recognition (OCR), Foreign Object Detection (FOD), Placement Inspection Algorithms and an Automatic Defect Type Classification function.
Industry News | 2020-01-06 16:06:59.0
MIRTEC will premier its complete line of 3D AOI and SPI Inspection Systems in Booth #1900 at the 2020 IPC APEX EXPO. The premier technical conference and exhibition for the electronics manufacturing industry will take place Feb. 4-6, 2020 at the San Diego Convention Center.
_1.jpg)
Parts & Supplies | Pick and Place/Feeders
Samsung nozzle of TN series & CN series Samsung Nozzle Samsung nozzle of TN series & CN sereis Usage:Samsung pick and place machine Product description: Samsung nozzle of TN series & CN sereis Issues related to improper nozzle/f
Technical Library | 2023-07-22 02:26:05.0
Patch offset; Uneven patches throughout the substrate (each substrate is offset in a different way); Only part of the substrate is offset; Only certain components are offset; The patch Angle is offset; Component absorption error; Laser identification (component identification) error; Nozzle loading and unloading error; Mark (BOC mark, IC mark) identification error; Image recognition error (KE-2060 only); Analysis of the main reasons for throwing material. More information about KINGSUN please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com
Technical Library | 2019-06-21 10:39:15.0
Recently, an ACI Technologies (ACI) customer called to discuss failures that they had observed with some through-hole capacitor parts. The components were experiencing failures following vibration and accelerated stress testing. Upon receipt of the samples, ACI performed three levels of inspection and Energy Dispersive Spectroscopy (EDS) testing to investigate the root cause of the failures. These analyses enabled ACI to verify the elements comprising the solder joints and make the following recommendations in order to prevent future occurrences. The first inspection was to investigate the capacitor leads using optical microscopy, and no anomalies were found that could indicate bad parts from the vendor or improper handling prior to assembly. However, vertical fill in the barrel of the plated through-holes was too close to the IPC-A-610 minimum specification of 75% to determine a pass/fail condition, and therefore required further investigation.
www.unisoft-cim.com/pcbplace.htm - The ProntoPLACE module from Unisoft is used by electronics manufacturers to generate the necessary programs for automatic PCB assembly machines in minutes. ProntoPLACE programs most popular surface mount (SMT) place
Lyra Reflow Oven is a soft soldering that realizes the mechanical and electrical connection between the solder ends of surface mount components or the pins and the printed board pads by remelting the solder paste pre-distributed on the printed board
Events Calendar | Wed Dec 06 00:00:00 EST 2017 - Wed Dec 13 00:00:00 EST 2017 | Rolling Meadows, Illinois USA
X-Ray of PCBs Webtorial
Career Center | Orange County, California USA | Quality Control
Job Description: Summary: Reporting to the COO/CTO the VP of Quality role will involve creating and/or augmenting the Quality system and programs to be a pro-active vs. a reactive structure. This will involve creating an overall quality vision, se
Career Center | Columbus, Ohio USA | Engineering
LSI ADL Technology LLC., a fast growing Electronics Manufacturing Service Provider in Columbus, Ohio is currently seeking a Manufacturing Process Engineer for SM and TH PCB manufacturing processes. This position is hands on and requires flexibility o
Career Center | Clearwater, Florida USA | Maintenance,Production,Quality Control,Technical Support
I have approximately 14 years experience in the Electronics manufacturing industry. I have experience from manual assembly to machine technical support for SMT eqiupment. I also have some experience with AI equipment. I have Automatic Optical Inspect
Career Center | Stouffville, Ontario Canada | Management
95% on time delivery. Measures daily manufacturing performance versus plan, and work with manufacturing and engineering to determine and communicate corrective actions to maintain on-plan performance. Develops and maintains inventory management sys
INSERT INTO tracking_express (userid, username, page_id, ts) VALUES ('#Quser_profile.id#', '#Quser_profile.username#', 102, (#ts#)) SMT Express, Volume 4, Issue No. 6 - from SMTnet.com Volume 4, Issue No. 3 Thursday, May 23, 2002 Featured
INSERT INTO tracking_express (userid, username, page_id, ts) VALUES ('#Quser_profile.id#', '#Quser_profile.username#', 100, (#ts#)) SMT Express, Volume 4, Issue No. 2 - from SMTnet.com Volume 4, Issue No. 2 Thursday, Febuary 22, 2002 Featured
| https://www.feedersupplier.com/sale-13119344-smt-machine-part-42418104-dc-motor-for-universal-6380a-insert-machine.html
smt machine part 42418104 DC Motor for Universal 6380A Insert Machine Basic Information Place of Origin: USA Brand Name: Universal Model Number
Lewis & Clark | http://www.lewis-clark.com/product/mydata-feeder-1x16mm-tm-insert-l-014-0412/
Mydata/Mycronic Feeders 1x16mm TM Insert - Part# L-014-0412 - Lewis and Clark Skip to content My Cart: 0 View Cart Checkout No products in the cart. Subtotal
