Electronics Forum | Thu Dec 03 07:49:30 EST 1998 | Steve Sauer
Hi Scott, The only information that I have on the Intelliplace machine is that it is their own design unlike the other models (Casio) that they are licensed to sell. As for the other machine (Europlacer Progress 6), I have an extensive background wit
Electronics Forum | Tue Dec 02 14:31:48 EST 2008 | dontfeedphils
Hey guys, just joined the site and I'm looking for some help. In our coating department we are running a Asymtek C-740 with a Jet and film coater. The coating that we are using is Humiseal 1B73 acrylic. The problem that we are having is that the C
Electronics Forum | Sat Sep 02 15:54:46 EDT 2023 | mekmat544
Hello, I would like to ask you for help. We have problem with our Selective Solder System SEHO PowerSelective. Problem is, that Z axis is decreasing. When we start soldering, height of Z axis is correct but after each solder cycle, there is decreasin
Electronics Forum | Wed Dec 20 13:40:11 EST 2000 | Roland
ECA- Electronic Component Assembly, Electronic Control Amplifier, Examination, Certification and Analysis (performed during IQT, Electronic Commerce Association,European Crystallographic Association, electronics contract assembly, Eastern Communicati
Electronics Forum | Thu Jul 25 10:52:26 EDT 2002 | waynesmith
I've been tasked with increasing the CCA throughput in our Conformal Coating workcenter. My first approach will be to look into a more *automated* approach for the masking process. We currently use a manual method of using masking tape prior to con
Electronics Forum | Thu Aug 14 17:29:15 EDT 2003 | Andrea
We use these but we hand solder. The resistor is basically a wire inside the encapsulant. When we noticed the bowing, we tested about 200 that were on different CCA's. They were all fine. If they want to use these under the wave solder, be sure to lo
Electronics Forum | Thu Sep 04 16:44:19 EDT 2003 | mleber
We are a military contractor running mixed technology CCA's. We currently "map" all defects off reflow and wave by indicating the defect on a map (plot from gerber) then passing it on to rework. The map is used for SPC data as well as overall perform
Electronics Forum | Fri Sep 12 09:10:23 EDT 2003 | Norm Morikawa
Around 1989 I had this probelmm with a SMT CCA that would not solder in one area consistently. I had it cross sectioned by the bare board supplier and found that under their metallurgical microscope the thickness of this HASL bare board could not be
Electronics Forum | Thu Apr 14 12:25:50 EDT 2005 | global
We currently have an old CCA assembly that a customer wants us to build but are unable to produce the gerber file or milars that were used to build them the last time. All we have are hard copies of the PWB drawing. Is there anyone out there that can
Electronics Forum | Thu Aug 01 00:17:17 EDT 2013 | paul_bmc
SMTnet colleagues, I am looking for your opinions on the PCB/CCA cleaning process. Regardless of fluxes or population complexity I want your opinion on these three cleaning processes and what you consider to be the best for what and why. Thanks for
winsouce.jpg)
