Electronics Forum | Mon Jul 14 11:59:41 EDT 2014 | rgduval
I've primarily used MyData equipment, personally, and, optically centered devices definitely take longer than mechanically centered parts on a MyData, owing to the construction of the machine. With a fixed upward looking camera, the head has to pick
Electronics Forum | Mon Aug 17 17:01:31 EDT 2020 | rgduval
+1 to what Sr. Tech said. I'd also add that you could have some uneven deterioration of the centering jaws. Check by doing a couple of things (this will help check if the tool/tip is bent/deteriorated as well): 1. Turn off mechanical centering, and
Electronics Forum | Wed May 26 12:20:38 EDT 2010 | emrtech
we are currently running 0201 components using the c-14 tool on the my9 pick and place and are having a lot of missing components with in the PCB's. is anyone or has anyone had this problem? if so, were you able to finf a fix for it?
Electronics Forum | Wed May 26 12:52:52 EDT 2010 | emrtech
Found a company that builds modified tool tips for my9 with stainless steel tip. we are going to try one and seen if it helps on placing the 0201 components. the rubber tip just gets damaged too easy and components stick to it do the solder flux.
Electronics Forum | Wed Jun 02 11:39:02 EDT 2010 | emrtech
so, i found a new tool tip nozzle for the my9 to place the 0201 components and works perfect. the tool tip is also made out of stainless steel. the nozzle was completely modified and works alot better than the OEM nozzle.
Electronics Forum | Tue May 07 16:19:47 EDT 2013 | dyoungquist
The "25v reads 3V" part of the error message may be your clue. Since the machine runs for a while and then shuts down, something may be failing after it warms up. "F-AXIS-182:C-AXIS NOT properly out when expected" refers to the centering jaws not o
Electronics Forum | Wed Apr 09 17:39:30 EDT 2008 | diesel_1t
Hi. I know that this is one of the mos common threads here, I have been doing some research, but i didn't find any similar. The main issue is that I have seen tombstoning since two weeks ago, it is more characteristic on 0603 resistors (Stackpole e
Electronics Forum | Fri Jul 26 11:20:33 EDT 2013 | gnus
Hi all, I'm having issues placing 7 pin DPak packages. I'm using mechanical centering with four centering phases (one for each orientation). Tool used is A24S. Machine picks up the part but will reject it when centering the part. I have measured all
Electronics Forum | Wed Oct 26 11:02:41 EDT 2011 | dyoungquist
TP9 machines are good, but old machines. We ran a TP9 for many years. As the machine got older it required more and more maintenance and had more frequent small issues similar to what you are seeing. We only saw 1 of your 4 issues specifically whi
Electronics Forum | Fri Dec 04 09:09:46 EST 2009 | bandjwet
We are considering purchasing an MY-19 refurbished from the factory. We were not initially looking at this model but it became available. Are there any issues with this model. (We already have an MY-9 and are familiar with the MYDATA and their suppor