Industry Directory | Manufacturer / Distributor
Midwest Circuit Technology provides Carbide Router Bits and End Milling Cuters for use in PCB Depaneling equipment. We have over 35 years of supplying tools and machining experience in drilling, Routing, Test Fixture manufacture.
Industry Directory | Manufacturer
Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.
Singulate Straight Tab Routed Panels Store cut tabs inside tool for discarding at operator convenience Available with 3 blade types and choice of support dies Clean cut - requires no rework for deburring PCB edges Easy blade change in under 5 m
Our Preco FlexPro CNC laser cutting system provides the speed of galvanometer processing with all the versatility of an XY motion system. Orion has the capability to cut detailed parts more precisely, and with shorter lead-times than conventional too
Electronics Forum | Thu May 13 07:12:30 EDT 1999 | carl
Hi All; Has anyone out there used a company called ENSIL out of N.Y. state to repair equip. (machine, Fuji, etc) circuit cards? Carl B.
Electronics Forum | Wed Jun 28 08:27:09 EDT 2006 | jem
Currently in house were using circuit cam for our programming (we run mydata hence mycam). When were programming were also creating keycards for SMT,SMT inspection, thru hole and thru hole inspection. Sometimes with heavily populated boards, 2000-25
Used SMT Equipment | In-Circuit Testers
Configuration: (1) PC (1) Keyboard, (1) Mouse & (1) Display (1) MTG Card [PN 9004-0108]] (1) HSC Card [PN 2277-4711] (1) CST Card [PN 2277-4712] (1) DS Reference Card [9004-0406] (6) Combo 2 Cards [PN 2277-4021] (1) Combo 2a Card [PN 9004-022
Used SMT Equipment | In-Circuit Testers
Configuration: (1) PC (with PCIO) (1) Keyboard, (1) Mouse & (1) Display (1) VP Card [PN 045-203] (1) ATB II Card [PN 046-213] (1) DSII Card [PN 047-081] (1) RAB II Card [PN 045-399] (53) DR IID Cards [PN 051-027] (5) DR II Cards [PN 046-153]
Industry News | 2021-06-15 04:22:53.0
IPCs Connected Factory Exchange (CFX) standard defines communication between processes and devices for Industry 4.0. MIRTEC and Optel Software worked together to develop a CFX based interface between MIRTEC's AOI machines and Optel Software's MES system. The goal was to implement full AOI process control at test it at their mutual customer site, VIRTEX plant in Dallas, TX. The resulting CFX interface is vendor independent and will allow MIRTEC to interface with other MES systems, and Optel Software to interface with other AOI machines, with no changes.
Industry News | 2003-02-20 08:04:10.0
The Mini-Fix card-to-cable connector is designed to withstand hundreds of mating cycles with high contact security and mechanical stability.
Parts & Supplies | In-Circuit Testers
Keysight / Agilent Part Number E4000-6X550 Hybrid Double Density 6mps Pin Card $3950 OBO
Technical Library | 2012-01-05 18:40:07.0
Conformal coating is applied to circuit cards to provide a dielectric layer on an electronic board. This layer functions as a membrane between the board and the environment. With this coating in place, the circuit card can withstand more moisture by incre
Technical Library | 2024-07-24 00:51:44.0
A blade server system (BSS) utilizes voltage regulator modules (VRMs), in the form of quad flat no-lead (QFN) devices, to provide power distribution to various components on the system board. Depending on the power requirements of the circuit, these VRMs can be mounted as single devices or banked together. In addition, the power density of the VRM can be high enough to warrant heat dissipation through the use of a heat sink. Typically, at field conditions (FCs), the BSS are powered on and off up to four times per day, with their ambient temperature cycling between 258C and 808C. This cyclical temperature gradient drives inelastic strain in the solder joints due to the coefficient of thermal expansion (CTE) mismatch between the QFN and the circuit card. In addition, the heat sink, coupled with the QFN and the circuit card, can induce additional inelastic solder joint strain, resulting in early solder joint fatigue failure. To understand the effect of the heat sink mounting, a FEM (finite element model of four QFNs mounted to a BSS circuit card was developed. The model was exercised to calculate the maximum strain energy in a critical joint due to cyclic strain, and the results were compared for a QFN with and without a heat sink. It was determined that the presence of the heat sink did contribute to higher strain energy and therefore could lead to earlier joint failure. Although the presence of the heat sink is required, careful design of the mounting should be employed to provide lateral slip, essentially decoupling the heat sink from the QFN joint strain. Details of the modeling and results, along with DIC (digital image correlation) measurements of heat sink lateral slip, are presented.
Cleanly and easily separate tab routed PCBs without dust. Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N100 Nibbler from FKN Systek. Blades are available in standard thicknesses
FKN Systek K1000 - Economical Manual and Motorized Depaneling of Pre-scored PCBs Blades Made of Long Lasting High Speed Steel.. Singulate Panels with Components up to 2.5" Adjustable front blade guard for correct scoreline input. Optional Work
Training Courses | ONLINE | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Training Courses | | | IPC-A-610 Trainer (CIT)
The Certified IPC-A-610 Trainer (CIT) courses recognize individuals as qualified trainers in the area of quality assurance of electrical and electronic assemblies and prepares them to deliver Certified IPC-A-610 (CIS) training.
Events Calendar | Wed Jul 03 00:00:00 EDT 2024 - Wed Jul 03 00:00:00 EDT 2024 | ,
Europe Chapter Webinar: "Back-to-Basics" SMT Assembly
Events Calendar | Wed Jun 07 00:00:00 EDT 2023 - Wed Jun 07 00:00:00 EDT 2023 | Indianapolis, Indiana USA
Indiana Chapter Technical Presentation and Networking Event: Batteries, Baseball & Beer
Career Center | Dallas, Texas USA | Engineering
Skills/Requirements: 4+ years experience and expertise in functional test development of RF wireless products. Provide DFT on circuit card assemblies. Duties/Functions: Design, analyze,build, implement and support test programs, test fixtures and equ
Career Center | Dallas, Texas USA | Engineering
Skills/Requirements: BSEE, BSET in electronic field, tech courses w/Equiv work, must have working knowledge of production testing of electronic assemblies containing digital/analog circuitry and power supplies. Candidates must be familiar with in-cir
Career Center | Fort Worth, Texas USA | Engineering,Maintenance,Production,Quality Control,Research and Development
A mechanically-inclined, results-oriented, lean-driven professional with proven success in implementing programs that result in efficiencies and cost savings. Effectively communicates with diverse audiences, encourages training and employee developme
Career Center | RANCHI, JHARKHAND India | Engineering
(1)-TECHNICAL SKILLS • SURFACE MOUNT TECHNOLOGY for PCB assembly • Cellular Mobile Communication • Mobile switching • Electronics device and circuits. • PCB card testing (2)-TRAINING SKILLS- (A) Six months industrial training at Indian Telephon
Lewis & Clark | http://www.lewis-clark.com/product-tag/in-circuit-test/
In-Circuit Test Archives - Lewis and Clark Skip to content My Cart: 0 View Cart Checkout No products in the cart. Subtotal: View Cart Checkout Lewis and Clark We Discover Equipment Opportunities NH: 603-594-4229 FL: 813-888-7436 sales@lewis
Imagineering, Inc. | https://www.pcbnet.com/blog/what-is-printed-circuit-board-use-for/
. A printed circuit board is the base component of many electronics like motherboards and network or graphic cards. They provide mechanical support and creates electronic pathways
Midwest Circuit Technology provides Carbide Router Bits and End Milling Cuters for use in PCB Depaneling equipment. We have over 35 years of supplying tools and machining experience in drilling, Routing, Test Fixture manufacture.
114 Barrington Town Square
Aurora, OH USA
Phone: 13309956900
winsouce.jpg)
.gif)
