Electronics Forum | Tue Mar 15 10:18:15 EDT 2011 | grahamcooper22
Hi, Does anyone have any experience of cleaning lead free solder paste residues off pcbs in a vapour degreasing process using Ensolv Ionic ? Any guide as to the best cleaning cycle would be appreciated. thanks
Electronics Forum | Thu Mar 17 15:34:35 EDT 2011 | grahamcooper22
Dear Rick , thanks for your reply. It is very helpful. I'll get chance to try the Ensolv in a lab next week to see if we can remove the paste residues. Thanks again
Electronics Forum | Mon Feb 03 11:17:55 EST 2003 | Randy Villeneuve
White residues are a common problem when cleaning no-clean fluxe residues. The white residue forms when the flux residue is partialy removed, etc. Alcohol should not be your only solution for cleaning. In general, solvents may attack some plastic par
Electronics Forum | Thu Mar 17 09:53:20 EDT 2011 | rperkins
Hi Graham, I've worked in the industry selling EnSolv, Lenium, and now ENTRON solvents, which are all based on stabilized NPB. These solvents do not always clean the no lead pastes. The problem is that the pastes are becoming more like adhesives,
Electronics Forum | Fri Mar 03 16:11:07 EST 2000 | cpitarys
Yes it is Ok and some folks ae doing it now, but unfortunatly IPA may not be the best solvent for this application. Take a small vial of the ipa and put some of your smt adhesive into it, shake it up and watch what happens, now step this up onto a l
Electronics Forum | Fri Mar 03 16:11:07 EST 2000 | cpitarys
Yes it is Ok and some folks ae doing it now, but unfortunatly IPA may not be the best solvent for this application. Take a small vial of the ipa and put some of your smt adhesive into it, shake it up and watch what happens, now step this up onto a l
Electronics Forum | Sun Nov 08 15:27:25 EST 2015 | davef
Thinner: Flux thinner, NOT paint thinner We kept a spare stone in thinner in inventory. We cut PVC pipe to size, cap in one end, screw thread on the other, stone inside, filled with flux thinner and covered with a screw cap. I don't remember who we
Electronics Forum | Mon Nov 09 09:44:22 EST 2015 | davef
Purpose. This describes setting-up a wave soldering system set-up for a new assembly design or checking a wave solder machine operation with a test board. Applicability. To be used for new design printed circuit assembles and during machine accept
Electronics Forum | Wed Jun 13 17:17:57 EDT 2001 | medernach
I use BioAct SC-10 and it seems to work pretty well. The best bet is to contact your solder paste manufacturer and ask them for a recommended cleaning solvent for the flux residues... Regards, Justin
Electronics Forum | Sun Feb 13 15:23:03 EST 2005 | Mike Konrad
There are several manufacturers of batch-format de-fluxing systems. Here is a list of them: Aqueous Technologies http://www.aqueoustech.com (909) 944-7771 Batch and Inline UnitDesign http://www.unitdesign.com (714) 672-9944 Batch Austin American T