Electronics Forum | Tue Dec 01 17:50:43 EST 2009 | swag
This is cut and paste from a Conceptronics Document - hope it helps you: Following are the lubricants recommended for oven maintenance: 1. To lubricate the conveyor chain use: A. Biral BIO30 -synthetic high temperature oil (highly recommended)
Electronics Forum | Wed Jun 01 19:31:03 EDT 2016 | marcelll
Strange problem with a Versaflo selective wave Very long for the pot to reach is set temperature ( 5 h ) At 180 C, the pump doesn’t seem to start like it should be So very long to heat the bottom of the pot Finally, the bottom element is turning on
Electronics Forum | Tue Nov 01 16:09:38 EDT 2022 | kamedatec
The machine had the Auto Tray installed but was removed to put here in the company because the machine was bigger than my elevator. The owner told me it was working, which made me waste time testing all possible settings, electronic cards and cables.
Electronics Forum | Wed Feb 25 02:50:33 EST 1998 | Scott McKee
| I am currently evaluating some different reflow ovens | for a future purchase. The manufacturers we are | looking at are Conceptronic, BTU, and Heller. Any | feedback on these manufacturers would be welcome. | I am particularly interested in: | 1
Electronics Forum | Sat Feb 07 22:03:25 EST 2004 | Dean
I have run into this before with a P&P machins. In one instance the 4 levels of passwords were published in the first revision manuals. OK, guess tech editors missed that??? FYI Anyways, I just wanted to mention that changing or altering software
Electronics Forum | Thu Aug 16 08:15:04 EDT 2018 | muzzy
Hello! Does anybody know how to access the "MS Parameters" window on older JUKI Pick and place machines? (mainly on 730, 740, 750, 760). Service manual mentions that it is possible to change all of the mechanical parameters from there (like for examp
Electronics Forum | Fri May 10 01:30:15 EDT 2024 | nicholascarson
Access the Calibration Screen: Navigate to the system settings menu on the HMI and find the calibration option. This may require entering a password or accessing a service mode, depending on the machine's security settings. Begin Calibration: Once
Electronics Forum | Tue Sep 08 13:33:07 EDT 1998 | Brad Kendall
For pick and place, I have worked with the Zevatech machines and Philips machines. Both are great machines. The Zevatech will give you greater speed and still offer great accuracy and repeatability. Don't let the belt drive stuff scare you, it sta
Electronics Forum | Mon Sep 21 01:57:55 EDT 2009 | kaz
Hello All, My first visit here. I own and operate a small Industrial & Consumer Electronics Service Shop. There is more and more modules with high density fine pitch SMDs that we cannot handle. We bought PACE ThermoFlow BGA SMD station with a bunch o
Electronics Forum | Mon Sep 28 09:31:43 EDT 2015 | proceng1
Proc > > My field service back ground included > Electrovert so I know reflow electrical quite > well. I've worked on Heller, Conceptronic and > Vitronics over the last few years and really > there isn't a huge difference if you can read a > sc
WINTECH provides new/used/pre-owned SMT, AI & PCB Assembly (PCBA) equipment of various brands. Also supply service, modification & original or local-made spare parts. We are also an appointed agent for well-known brands.
Equipment Dealer / Broker / Auctions
NO. 1 LORONG SAGA JAYA 6
PERAI, 09 Malaysia
Phone: 6043809899
