New Equipment | Coating Equipment
Cost-effective Solutions for Conformal Coating New cost-effective, automated Conformal Coating System (SimpleCoat TR) with tilt and rotate capability and excellent repeatability for just under $48,000. SimpleCoat basic model without tilt and rotate
Hanwha HM510 Pick and Place Machine High Speed: 60,000 CPH Placement Accuracy:±40 μm @ Cpk ≥ 1.0 (Chip) / ±30 μm @ Cpk ≥ 1.0 (IC) Component Range:0402 ~ 55 mm Spindles: 6 spindles x 2 Gantry Hanwha HM510 Pick and Place Machine Hanwha HM510 P
Electronics Forum | Mon Dec 17 12:06:58 EST 2007 | pjc
5 Steps to Eliminate Bridges: 1. Establish (wave) Parallelism First and foremost, you must establish board-to-wave parallelism. This is the prerequisite to any wave solder process control. For an understanding of the power of this approach go to ht
Electronics Forum | Mon Nov 09 09:44:22 EST 2015 | davef
Purpose. This describes setting-up a wave soldering system set-up for a new assembly design or checking a wave solder machine operation with a test board. Applicability. To be used for new design printed circuit assembles and during machine accept
Used SMT Equipment | Soldering - Reflow
(2) Vitronics XPM2 Reflow Ovens - Auction Items www.xlineassets.com - Auction September 10th Other Available Equipment in Same Auction: • Fuji CP65 Chipshooter, SN 793, 0201 Camera Fuji • QP 351-MM Pick and Place System • Fuji QP 351-MM Pick
Used SMT Equipment | Pick and Place/Feeders
(2) Fuji CP 7 Chipshooters Available. www.xlineassets.com - Equipment To Be Sold To Highest Bidder September 10th. Other available equipment in same auction: • Fuji CP65 Chipshooter, SN 793, 0201 Camera Fuji • QP 351-MM Pick and Place System
Industry News | 2019-08-21 16:17:24.0
Nordson ASYMTEK introduces its Forte™ Series fluid dispensing system. The Forte Series combines high accuracy fluid dispensing with increased throughput and productivity in a narrow footprint to handle applications such as flex circuit and printed circuit board assembly, electro-mechanical assembly, MEMS, underfill, precise coating, and encapsulation.
Industry News | 2009-09-10 13:09:28.0
The team at Rehm Thermal Systems are preparing to showcase the company’s best-in-class capabilities for solar cell metallization at the 24th European Photovoltaic Solar Energy Conference & Exhibition. Being held from September 21st – 25th in Hamburg, Germany, EUPVSEC 2009 will introduce visitors to the thermal specialist’s recently updated line of fast-firing systems and drying ovens.
Parts & Supplies | Pick and Place/Feeders
Supply JUKI 2080 laser 8005674 and repair Other juki parts: 40045126 HEAD L UP/DOWN SENSOR ASM 40045127 HEAD R UP/DOWN SENSOR ASM 40045132 HEAD L EJECTOR ASM 40045133 HEAD R EJECTOR ASM 40045135 FAN MOTOR(X MOTOR) ASM 40045136 LASER SENSOR CON
Parts & Supplies | Pick and Place/Feeders
Which series nozzles could be used for Phlips Topaz and Emerald machine As we know, many parts are compatible for Yamaha and Philips machines, but some models their nozzles are not generic.So which series nozzles could be used for Phlips Topaz and
Technical Library | 2019-05-23 21:56:56.0
Automatic on-line shoe sole spraying system: automatic shoe sole spraying system, simple and convenient operation, using 3D vision positioning system. Automatic recognition and automatic generation of spraying trajectory. Robot non-contact spraying gun is used to complete the process of shoe sole spraying with maturity, stability, high speed and high precision along the predetermined trajectory. The automatic generation of spraying trajectory is the realization of shoe sole spraying technology. Shoe sole spraying characteristics: 1.Positioning System: 3D Visual Positioning 2.Components: Intelligent Robot, Laser Scanner, Industrial Computer, Gum Spraying System, Conveyor Belt, Electrical Control System, etc. 3.Spraying time: slightly different according to shoe size and spraying time Fully automatic sole spraying advantages: 1. Simple application: suitable for soles of different specifications, models and sizes 2. Faster speed: 6-8 seconds to complete sole scanning and spraying, superior to similar products at home and abroad. 3. Quality stability: gum spraying trajectory is scheduled, gum dosage is fixed, gum spraying quality is greatly improved. 4. High cost performance: the same performance, the price is only 1/3 of the same type of equipment of European brand. 5. Reduce wear and tear: glue is fully utilized and not wasted, reducing human contact with glue. Intelligent operation advantage manual only need general operation can be automated workshop, mechanical arm automatic spraying glue, accurate spraying, reduce glue waste. Environmental protection effect of long-term close contact with glue seriously affects human health and mechanical work, glue does not directly contact, do not harm the human body. Fully automatic spraying, shoe sole adhesion process for automatic spraying machine, will not cause great challenges! With the deepening of personalized shoemaking, higher requirements have been put forward for the spraying technology in shoemaking process. The method of creating spraying trajectory must be adapted to shoes of different sizes and styles. The automatic generation of spraying trajectory is one of the key technologies to realize the automation of shoe sole spraying process. The method of off-line programming and real-time generation of spraying trajectory for robots based on the three-dimensional CAD model of sole and the data of sole. A new method of generating spray trajectory by scanning the sole of shoe upper with linear structured light sensor is presented. The feasibility of the method is verified by industrial robots. Aiming at the need of generating shoe sole spray rubber trajectory based on line structured light, the format standard of IGES file of three-dimensional model of shoe sole was tested. The shoe sole contour line and the shoe sole surface were extracted, and then the offset curve of the shoe sole contour line on the shoe sole surface was calculated to obtain the spray rubber trajectory. Three-dimensional profilometer is to use structured light to obtain sole information, effectively improve the automatic shoemaking spraying process, which will help to improve the efficiency of shoemaking, improve the quality of footwear products, and promote the development of personalized shoemaking.
PCB 90°turning conveyor and PCB turn diverter/PCB conveyor machine link: https://www.ascen.ltd/Products/Automatic_SMT_equipment/PCB_conveyor/95.html PCB 90°Turn conveyor is designed for changing the conveying direction of flow of a PCB production li
PCB 90°turning conveyor and PCB turn diverter/PCB conveyor machine link: https://www.ascen.ltd/Products/Automatic_SMT_equipment/PCB_conveyor/95.html PCB 90°Turn conveyor is designed for changing the conveying direction of flow of a PCB production li
Technology Co., Tsinghua University This paper studies an
, Alex Chiu; Agilent Technologies. Gold embrittlemen
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/products/conveyors?con=t&page=6
Industrial Conveyor and Loading Systems | Nordson Nordson Corporation Global Directory | Languages NASDAQ $221.87 -0.38 Our Products Our Industries Our Applications Brands
GPD Global | https://www.gpd-global.com/pdf/dispense/Dispensing-Systems-and-Pumps-Overview.pdf
from a robot or external control system. Up to 6 different program sets are available and can be selected remotely via external input. The controller kit includes the controller and cables for operation. Plug and go! request@gpd-global.com www.gpd
