Industry News | 2014-01-17 12:52:25.0
BEST Inc., has developed a line of Kapton™ SMT stencils for the prototype assembly market. These stencils, available in 4,5 and 6 thicknesses, present very flat coplanar printing surfaces for solder paste printing. . They are designed to be used when the there are very few boards to be made at one time and the pitch of the components is 1.00 and above.
This video describes what the IPC-J-STD-001 training program and the document for assembling printed circuit boards. In this video BEST Inc describes the assembly standard and what it entails . It also describes what the training program is. Operato
This video describes what the IPC-J-STD-001 training program and the document for assembling printed circuit boards. In this video BEST Inc describes the assembly standard and what it entails . It also describes what the training program is. Operato
This video introduces the most popular IPC specification - the IPC-T-50 terms and definitions. Norman Mier gives this overview of this popular specification. More information on solder training solder and certification can be found at: http://www.so
Industry News | 2021-05-20 23:49:01.0
People often used direct current as a means to charge batteries and their electronic devices. They also use DC power for third rail power systems and railway propulsion. While DC means direct current, it also means constant polarity. Some types of DC will have variances in their voltage, while most will not. A good example of varying voltage would be fluctuating voice signals on a power line. One should never try to reverse the polarity in a DC device, unless it features a diode bridge that will allow for the switch. Most of the battery-powered devices that people use do not have this bridge, so trying to alter the polarity would actually destroy the device.
Technical Library | 2024-06-07 16:16:26.0
A description of laser PCB Depaneling, the technology used and benefits.
Technical Library | 2024-05-10 19:04:47.0
A Review of laser singulation and what it is and how it can benefit PCB Contract Assembly.
Technical Library | 2015-07-14 21:32:04.0
The PCB industry is ever changing and adapting to new technologies. OEM specifications and requirements have also advanced due to these technologies. In some cases the OEMs are asking for a low resistance test to be performed on some or all electrical test nets of the PCB or on the holes of the PCB. This requirement is typically not well defined on the fabrication drawing and that leads to misleading conclusions by the fabrication house (...) This paper will use the data gathered by the company’s operations to outline what a 4-wire Kelvin test is and how it can be used. Several examples will be illustrated of what the 4 wire Kelvin test can and cannot do. A clear definition of what limitations are present during the testing operation will be defined. The paper will assist designers in understanding how the low resistance test can assist them and also identify causes that can identify unwanted concerns/issues.