Electronics Forum | Thu Mar 01 16:39:29 EST 2012 | triadelectronics
Our company is going to attempt to place 0201 components using our Fuji CP4-3 with the upgraded SMD3 vision system. Count On Tools is providing the 0.4 mm nozzles and we are using our 8mmX2mm feeders with the 0.7mm tape leaf (if it works at all we w
Electronics Forum | Wed Nov 24 07:02:15 EST 1999 | JAX
Larry, Carl's right about vision 254 and 255 but I believe CP4's can be set up to check for a part on the nozzle,(parts check sensor)like any other CP. This could be activated to make sure parts are being placed. Then again CP4's might not ha
Electronics Forum | Thu Jun 29 12:41:26 EDT 2006 | chrisgriffin
I once had a CP-4 that was not cutting the paper from the reel, and the paper was nocking off the parts. You could also check the vacuum at pick-up and placement stations. What kind of parts are they? It might be a good idea to calibrate the stati
Electronics Forum | Mon Nov 11 02:03:06 EST 2013 | dman97
Use fuji vision #12. That is for the resistor network types. You cant inspect the individual leads. Vision type 12 tell the CP that this is a rectangular chip with terminals. You don't need to define the leads in the PD just the overall shape of th
Electronics Forum | Wed Nov 24 06:38:57 EST 1999 | carl
Hi Larry; Have you tried just to place it as a square. Or if all fails try vision 254 255. Just be carefull with this as it will place nothing if the reel runs out. Give me a call.
Electronics Forum | Fri May 23 12:18:59 EDT 2003 | vortex
First off is your CP4 0402 ready? Before we could begin placing 0402's we had to have a vision upgrade. Once you have that or are sure your machine can handle 0402 then you will have to get 8x2 feeders. There may be a way to rig an 8x4 feeder but i'm
Electronics Forum | Sat Aug 22 00:23:10 EDT 1998 | Arul Vanan
We are using PCBs of CEM3 Material with bare copper fiducials. The whole board is of bare copper with a lacquer coating (Coats brother S2974). The fiducials are of 1 mm diameter bare copper. we use Panasert MV2F as well as Fuji CP4-3. In both the m
Electronics Forum | Sat Aug 22 00:11:49 EDT 1998 | Arul vanan
We are using PCBs of CEM3 Material with bare copper fiducials. The whole board is of bare copper with a lacquer coating (Coats brother S2974). The fiducials are of 1 mm diameter bare copper. we use Panasert MV2F as well as FUji CP4-3. In both the mac
Electronics Forum | Mon May 21 20:55:19 EDT 2001 | dougk
We have both CP 4/2's and 4/3. We're also running Siemens S20's & F4's. The 4/3's vision is more temperamental and slightly harder to program. Machine startup and nozzle centering takes longer, but placement time is slightly better. Honestly, for wha
Electronics Forum | Sat Aug 22 10:25:11 EDT 1998 | Ben Salisbury
| We are using PCBs of CEM3 Material with bare copper fiducials. The whole | board is of bare copper with a lacquer coating (Coats brother S2974). | The fiducials are of 1 mm diameter bare copper. we use Panasert MV2F as | well as Fuji CP4-3. In bo
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
