Electronics Forum | Mon Aug 21 10:47:48 EDT 2006 | FredC
Hello Mika, I just checked a windmill and a test nozzle we have on the bench. The useful travel of the nozzle before the risk of the crosspin getting stuck in the loading gate is 1.5mm, if it gets stuck it is the nozzle is 1.7 up. If the cross pin is
Electronics Forum | Wed Sep 11 01:17:59 EDT 2002 | Brian Sloth Bentzen
Hi Steve. My Fuji CP6 is model 643 and are 3 years old, maintained and upgraded with the newest software along the way. And, actually it was Fuji Japan that gave in, not Fuji America. Fuji Japan tested our components and found the same problem and
Electronics Forum | Sat Aug 19 21:06:09 EDT 2006 | mika
Hi all, At our Fuji CP-6 machines we place a lot of 0402:s, 0603:s and 0805:s chip capacitors. Our problem is that the height of the components can sometime be very extreme from different vendors. I am sure you all have experience of this phenomenon
Electronics Forum | Tue Mar 04 11:47:58 EST 2003 | msivigny
Hello John, Your second statement is a little vague about the 16th card shutting down the line with the 2x240 QFPs misplaced... i'll try to interpret, assuming the cards are actual product, which I think they are, your 16th card failed because 2 out
Electronics Forum | Sun Oct 04 08:07:53 EDT 1998 | jvo
| I am experiencing solder paste comtaminatin of nozzels on 0603 size components resulting in missing components. The machine is failing to alarm under these circumstances. Has anybody else experienced this problem & found a solution? | Check if you
Electronics Forum | Thu Jul 21 08:27:05 EDT 2005 | grantp
Hi, Yes, that's an idea, but from my experience with MYDATA, it would fail test, and the machine would either know it's lost the component, or it would not know, and the component would not be on the pad because the machine would think it's mounted
Electronics Forum | Fri Jan 13 07:54:27 EST 2006 | johnw
Hi Rob we had Electroverts and the cost to convert them was just crazy and the nozzles and specification would never have really be able to run leadfree as for life of the machine, I was able to see the machines running some for had been running 24/7
Electronics Forum | Mon Jul 18 21:36:18 EDT 2022 | ttheis
We have two GSM machines (4-spindle, single beam) and had a camera fail on one machine. We decided to clean and calibrate the cameras on both machines. One machine we had no problems and all is working properly. The other machine will not pick up the
Electronics Forum | Fri Nov 06 15:42:58 EST 2015 | sdmideas
I am having a darn hard time getting my upward vision to successfully inspect a ssop14 package. I have created a part profile as defined by the manual as I understand. I believe the profile is ok based on comparison to like parts referenced in the q