Industry Directory | Manufacturer
Suppliers of solder pastes, wave soldering liquid fluxes and SMT adhesives and cored solder wires for all soldering requirements.
Industry Directory | Manufacturer
Shuttle Star Technology designs and builds advanced off-line 2.5D&3D x-ray inspection systems for solder joint and final assembly test inspection in SMT&EMS. It uses world-class X-ray techniques with advanced defect detection.
New Equipment | Test Equipment
Koh Young ZENITH Alpha UHS 3D AOI chip range: 01005 PCB size:330x330mm Cameral resolution: 12M 15μm, Inspection height: 4mm Dimension:820x1265x1627mm weight:550KG Product description: Koh Young ZENITH Alpha 3D AOI, chip range: 01005, PCB size:330x33
New Equipment | Test Equipment
Koh Young ZENITH Alpha HS+ 3D AOI chip range: 01005 PCB size:330x330mm Cameral resolution: 8M 15μm, Inspection height: 25mm Dimension:820x1265x1627mm weight:550KG Product description: Koh Young ZENITH Alpha 3D AOI, chip range: 01005, PCB size:330x33
Electronics Forum | Fri May 31 10:15:30 EDT 2019 | davef
Major sources of crack in the solder connection after thermal cycling are: * Thermal heating caused by differences in thermal expansion between the board and the component * Lead-free solder is more rigid and brittle than eutectic solder in simila
Electronics Forum | Fri May 31 05:54:09 EDT 2019 | dhanish
What are the common cause for solder joint crack after the pcba go through Temperature cycling test ?We have seen failure on solder joint for the memory part.
Used SMT Equipment | SMT Equipment
Baking SMT on a cheap kitchen toaster oven is not difficult. You just need some patience and exploration good will. In this page you will read the manual procedure to bake SMD boards into a regular kitchen toaster oven appliance. Follows information
.jpg)
Used SMT Equipment | Soldering - Reflow
Features 1. Full hot air reflow heat fast, high thermal efficiency compensation, delta t less than ± 2 ℃ soldering is uniform. 2. HELLER company has 40 years of history, process maturity. 3. maintenance costs low, the furnace normal use, electrici
Industry News | 2018-10-18 09:27:40.0
Time Temperature setting wave soldering is the most important in the solder melts
Industry News | 2010-04-30 18:47:15.0
SMTA China announces that it presented awards for the 10 best papers/presentations and two best exhibits at the SMTA China East 2010 Conference Award Presentation Ceremony, held on Wednesday, April 21, 2010 at the Shanghai Everbright International Hotel in conjunction with the SMTA China Annual Breakfast Reception.
Parts & Supplies | Soldering - Wave
Controller and interface assembly from an ERSA wave solder machine EPROM V2.97 KUHNKE 71.633. 425.120.01 The glass is cracked but the LCD is not cracked. FOB: Origin AssuredTechnicalServiceLLC@Gmail.com
Technical Library | 2023-08-16 18:20:44.0
One of our defense customers planned to dispense underfill material for small and large die, using Hysol FP4545FC epoxy encapsulant. This process dissipates stress on solder joints and prevents cracking and fracturing between the bottom of the die and the surface of the substrate.
Technical Library | 2014-06-19 18:13:23.0
For high-density electronic packaging,the application of flip-chip solder joints has been well received in the microelectronics industry. High-lead(Pb) solders such as Sn5Pb95 are presently granted immunity from the RoHS requirements for their use in high-end flip-chip devices, especially in military applications. In flip-chip technology for consumer electronic products, organic substrates have replaced ceramic substrates due to the demand for less weight and low cost. However, the liquidus temperatures of high-Pb solders are over 300°C which would damage organic substrates during reflow because of the low glass transition temperature. To overcome this difficulty, the composite solder approach was developed...
http://www.pcb-separator.com/ https://www.pcb-separator.com/html/PRODUCTS/PCB%20separator/2019/1113/832.html Hand push pcb cutter/PCB cutting machine manufacturer/PCB V-cut machine manufacturer/PCB depaneling equipment, automatic pcb cutting machine,
http://www.pcb-separator.com/ https://www.pcb-separator.com/html/PRODUCTS/PCB%20separator/2019/1113/832.html Hand push pcb cutter/PCB cutting machine manufacturer/PCB V-cut machine manufacturer/PCB depaneling equipment, automatic pcb cutting machine,
Training Courses | | | IPC-600 Specialist (CIS)
The Certified IPC-600 Specialist (CIS) training targets quality assurance and acceptance of bare printed circuit boards.
Training Courses | | | Other Courses
Other courses related to electronics manufacturing and assembly
Events Calendar | Mon Mar 16 00:00:00 EDT 2020 - Mon Mar 16 00:00:00 EDT 2020 | ,
BGA & Area Array Failures, Causes & Corrective Actions Online Webinar
Events Calendar | Tue Jan 23 00:00:00 EST 2018 - Tue Jan 23 00:00:00 EST 2018 | New Milford, Connecticut USA
FREE Webinar: Eliminate Circuit Board Problems and Failure Modes
Career Center | , District of Columbia | Engineering,Management,Production,Sales/Marketing
• Strong technical leadership and decision-making skills; strong verbal and written communication skills to provide clear, crisp direction for key issue resolution; and good team skills to facilitate cross-functional cross -site team effectiveness.
Career Center | binan city, Laguna Philippines | Engineering,Maintenance,Technical Support
6.5 Years Experience in Semiconductor Industry Specializing in Dispensing process and Equipment. 5.0 Years of Experience in Field Service Engineering. Machine Commissioning / Customer support 24 / 7, Technical Support for Customer machine and process
SMTnet Express, October 28, 2021, Subscribers: 26,544, Companies: 11,461, Users: 26,907 Cracks: The Hidden Defect Cracks in ceramic chip capacitors can be introduced at any process step during surface mount assembly. Thermal shock
SMTnet Express, February 6, 2020, Subscribers: 33,800, Companies: 10,971, Users: 25,576 Accurately Capturing System-Level Failure of Solder Joints Credits: DfR Solutions Consortium Projects - Thermal Cycling Reliability Consortium projects allow
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/Vacuum-Void-Reduction-Reflow.pdf
]] found that the presence of a voids was not necessarily sufficient to lower solder joint reliability. Rather, the location of void relative to the solder joint failure crack path has a much larger impact than the existence of the void alone. Figure 3
| https://www.eptac.com/soldertips/problems-with-stress-cracks-in-ceramic-components/
. Although it may not be seen at this time, the ceramic will fracture when exposed to heat cycles. Solder paste, Tin/Lead or Lead-Free. Lead-Free is more brittle and the stress relief will be absorbed by the component causing it to crack
winsouce.jpg)