Electronics Forum | Mon Feb 14 15:14:54 EST 2000 | dean
Dek 248 / 249 (mfg'95) MPM 2000 Realignment? Are you having to insert print offsets (X.Y, theta)? If yes, your vision cubes are out of alignment. This typically happens if a "crash" occures. A "C" tool can correct this. Or are we talking abou
Electronics Forum | Sun Dec 20 12:42:57 EST 2015 | dilogic
We have DEK248 and Ultraprint100 printers. Ultraprint100 has custom video hardware while DEK has PC-based vision,which I prefer. Both perform roughly the same, and each has some design advantages over the other. We do routinely print 0.5mm pitch TQF
Electronics Forum | Mon Feb 20 17:56:46 EST 2006 | Chris
If you are running FR4 PCBs and not something exotic like Kapton flex circuits, I would go with the Dek 265 any day of the week. You will find that Dek supports the fully automatic printer much better than the semiautomatic printers like the 260, 24
Electronics Forum | Thu Feb 17 17:33:34 EST 2022 | mnorthey
Hi all, I have a Dek 265 Horizon that fails to print at the correct pressure. It fails pressure every pass. I am trying to Calibrate it with a PFR1200N pressure Tester which we use for our DEK 248 Printers. I am trying to build up the table height
Electronics Forum | Mon Feb 14 14:50:43 EST 2000 | Dennis _F
Dean How old are the DEK units that you have. The purpose of the printer will be for small runs. The problem Im having with our current ultriprint 2000 is it seems to require re-alignment each time the product is setup.
Electronics Forum | Mon Apr 19 15:27:05 EDT 2004 | pjc
The MicroFlex is not really new. Its the UltraPrint 100 re-engineered and improved. UltraPrint 100 / SMTech 100 has been around for many years. I don't believe the DEK 248 offers a Stencil Wiper option. I worked on MicroFlex machines. Vision system i
Electronics Forum | Thu Aug 23 02:31:14 EDT 2012 | fox_su
Hi! We have a dek 265 gsx printer. And we have a problem with it. After determination of fidutials it puts the paste differently. Sometimes it puts senterline, sometimes left of center and right of center. We can't identify the problem. Could you pl
Electronics Forum | Fri Oct 31 14:09:07 EDT 2014 | wbrenner
Having a problem with a DEK printer. In the back to front motion, getting poor ramdom paste volume on micro BGA pads. Other BGA 1 mm pads are fine. The front to back motion is fine. Any throufghts on this directional issue. Ran ~200 panels no pr
Electronics Forum | Mon Oct 11 17:02:06 EDT 2004 | M Deren
We have a DEK 260 with a intermittant table align stepper motor problem. The machine will work fine for awhile and then one of the table align motors starts either moving hapazardly in small increments back and forth or vibrates as if it wants to mov
Electronics Forum | Mon Oct 11 17:06:55 EDT 2004 | M Deren
We have a DEK 260 with a intermittent table align stepper motor problem. The machine will work fine for awhile and then one of the table align motors starts either moving haphazardly in small increments back and forth or vibrates as if it wants to mo
