Electronics Forum | Sun Aug 04 04:30:13 EDT 2019 | alexeyzb
Hello! I used three from your list: ESE, DEK and SpeedPrint. From my point of view ESE is the best choice (ESE - good and not so expencive, DEK - very good and expencive, SpeedPrint - average). 2D is slow option and need to compare with efficiency ot
Electronics Forum | Mon Mar 24 14:19:36 EDT 2008 | burb1999
I have a DEK ELA and here is what happens. I print a board after going through the step and it is a dead on print. Then, with another print it will be off in Auto mode (sometimes up and sometimes down, seems to just be up and down not left to right
Electronics Forum | Thu Feb 13 11:42:36 EST 2003 | vortex
We currently screen print all of our adhesive applications and generally have favorable results. The adhesive we use is: Heraeus , P/N 250 GM Prod/N PD955PR We print this on three different screen printers, Dek 265 Horizon, Fuji GSP-II and MPM-30
Electronics Forum | Thu Nov 15 07:59:53 EST 2001 | John S
My company is in the process of evaluating dispensing/screen printing vendors for a new production line that will build a mixed through hole and smt board in high volume. DEK recently came out with a system that uses a thick plastic stecil with mach
Electronics Forum | Thu Apr 20 14:24:54 EDT 2006 | pms
Sr.Tech, Don't know about AP25's, we have a DEK. We have problems with some large board sagging in the middle, causing the board to slip under the board stop, but our DEK has the ability to program the board stop anywhere in the Y direction, allowin
Electronics Forum | Thu Nov 30 04:02:26 EST 2000 | Chris May
Michael, Thanks for your response. More info:- The processes are as follows, Stencil Print (6 thou on DEK 248) Placement on Contact 3AV and Reflow on BTU 4 zone Top & Bottom oven.It is not an In-Line system. Our board technology is mixed but heavi
Electronics Forum | Tue Jul 16 07:59:14 EDT 2002 | hany_khoga
Hello there: 1- I know someone who diluted expired solder paste, which obviously lost its tackiness using Isopropanol. The paste was expired by more than 6monthes but after dilution I saw by myself the paste has retrieved its tackiness. The amazing
Electronics Forum | Thu Feb 15 16:58:11 EST 2007 | flipit
Phil, I used to print solder paste on 2" X 2" and 3" X 3" 96% Alumina substrates all the time. I used standard solder printers and stencils. Screens are difficult to use and don't print well. You can use a stencil on a DeHart, CW Price, or AMI Pr
Electronics Forum | Thu Mar 30 10:02:03 EDT 2017 | Bestglobal SMT
We have a 2008 DEK horizon 03i this machine has been a very reliable system. we are having an issue with the print being offset in the x .2mm I have run 4 different boards - same issue on all. same offset. i can print the board 10 times over and
