Electronics Forum | Thu May 16 08:01:37 EDT 2013 | emeto
This might be a cable. It is not broken all the way - that's why you don't get the error all the time. After it moves for awhile it will break the connection and you start getting the error.
Electronics Forum | Sun Dec 23 00:11:43 EST 2007 | ktroym
When I try to bootup the machine I am getting an error that reads Dumping physical memory and a bunch of numbers & letters on the screen. The machine runs windows NT. Has anyone else had a problem like this before.
Electronics Forum | Thu May 16 04:54:33 EDT 2013 | aj
Hi all, I have an intermittent problem on a 265 GSX printer. "Position error" on the rising table.. quite a lot of work has been done with no success. such as motor, break , encoder replaced....diagnostic checks etc.... Machine could run for a few
Electronics Forum | Fri Aug 24 02:40:52 EDT 2018 | bukas
first check fuses in Y1 case. thats where EuroSYS cards are, and message you get tells you that cards can not communicate with main processing board in Y3 case via RS485. after that check cables and connectors. there are 4 EuroSYS cards in Y1 case, t
Electronics Forum | Tue May 27 15:11:13 EDT 2014 | dekhead
1. Rising Table Position error is, most commonly an issue of motor movement or sensor(s); Not receiving an expected input (sensor input / 'DONE' signal) in expected period of time. Try homing table in Diagnostics see if it moves and what movements ar
Electronics Forum | Mon Sep 19 11:29:33 EDT 2011 | padawanlinuxero
Hello guys ! I have a problem with a DEK 265 GSX, sometimes after download the vision or during, I get this error message: Vision hardware error Controlled lighting not responding FATAL ERROR - REINITIALISE MACHINE Now for a few weeks it gave me
Electronics Forum | Wed Mar 13 05:08:45 EDT 2013 | JB
Hello. Did you get this error fixed? I have the same problem at the moment.
Electronics Forum | Sun Sep 25 16:45:38 EDT 2011 | cbroegger
Have seen this with bad/intermittent connections to the camera. Replacing the cable fixed this.
Electronics Forum | Thu Mar 14 03:51:04 EDT 2013 | JB
Ok, got it fixed now, found a broken wire on the back of the camera
Electronics Forum | Mon Dec 14 06:26:16 EST 2015 | fredmoulin
Hi guys, I got a problem with our DEK 265 GSX : This message appears : 1300044 - Failed to perform Lighting calibration. Please, what does it mean, and how can I solve it ? Thanks very much.