Electronics Forum | Wed Sep 23 23:10:26 EDT 2015 | richardcs
Does any one have calibration jigs for a DEK265 LT, a full manual with schematic would be good as well?
Electronics Forum | Wed May 20 10:00:00 EDT 1998 | EFData
The quick frame does work well with the DEK 265, but we feel that tensioning is user dependent and introduces variation into the process on an operator to operator basis. Also, because tensioning occurs only on two sides (instead of four) this also i
Electronics Forum | Wed Mar 14 20:06:54 EDT 2007 | vshan
Hi All i need some help here, currently experiencing connector leg shifted due to solder paste shifted from pad ~0.3mm. I did adjusted the reverse/forward X, Y and titah but still shifted. Product : flex circuit with 28 connector on the panel. Each
Electronics Forum | Mon Sep 03 04:05:56 EDT 2012 | omur
The issue has finally been resolved. It turns out that while checking the vision board, our engineers accidentally changed the address of the Analogue Board (which is adjacent to the vision board) - thus, leading to this startup error - with the unh
Electronics Forum | Fri Sep 14 10:30:45 EDT 2012 | dekhead
I believe there was a software issue as well; Initially installed software (4.03) replacing existing 2.12. After that it got past the "Stack Overflow" and displayed the expected error for incorrect addressing on PCAD12... BTW solution to "vision boa
Electronics Forum | Tue Nov 03 17:28:10 EST 1998 | smd
SMTnetters: My UIC conveyors aren't working with my: Omniflow 7 Reflow (Mfg 1/95) Dek 265 GS Philips CSM What can I do? Does anyone have experience with connecting UIC or other conveyors to the above equipment? On the reflow I jumped terminals 1
Electronics Forum | Wed May 20 07:13:15 EDT 1998 | smd
Does anyone use the "Quick Frame" with their Dek printer? The threads on the screws keep stripping, so we thought maybe we'd send our frames to a machine shop for heftier screws. Has anyone done this? Is there a better way? Isn't it weird how Alpha k
Electronics Forum | Wed May 20 19:35:59 EDT 1998 | Rin Or
| Does anyone use the "Quick Frame" with their Dek printer? | The threads on the screws keep stripping, so we thought | maybe we'd send our frames to a machine shop for heftier | screws. Has anyone done this? Is there a better way? | Isn't it weird h
Electronics Forum | Thu May 23 12:27:19 EDT 2019 | weglimir
Hello I have problem with card: VPM-5238D - Namely when printer starts, and DEK program initializes, it hangs for a while on "Downloading vision system" and then following error appears: "Vision Hardware Error - FATAL ERROR - REINITALIZE MACHINE" "
Electronics Forum | Fri Feb 27 08:44:12 EST 2004 | kauer
Looking in my DEK 265 LT manual, frame size external is 29 by 29 by 1.6 in. 26 by 26 internal, and printing to within side of frame = 75 mm.Hope this helps.